Sinar Hy6 manual Lever of the magnifying glass

Page 28

ASSEMBLY INSTRUCTIONS

5.1.3Opening and Closing the Magnifying Glass

1

Fig. 5 / 6 Lever of the magnifying glass

Fig. 5 / 7 Magnifying glass

The viewfinder is equipped with a magnifying glass of –0.5 dioptres that can be opened and closed. Pull the lever 1 upwards. The frame with the magnifying glass becomes visible.

To shut the magnifying glass, slightly push the frame downwards. The magnifying glass will snap back into its original position.

5.1.4Replacing the Magnifying Glass

Additional magnifying glasses with other dioptres are optionally available. Please contact your dealer for further information.

1

2 2

1

Fig. 4 / 8 Replacement of magnifying glass

To replace the magnifying glass, hold the two small lugs 1 on each side of the lens. Turn the mounting of the magnifying glass anti-clockwise so that the two latches become visible 2.

Take the lens out of the frame.

Replace the lens by inserting it into the frame in a way that the two latches´2 are inserted into the corresponding gaps. Hold the small lugs 1 again and turn the mounting with the magnifying glass clockwise. You will hear a click when the mounting with the magnifying glass is inserted correctly.

17

Page 27 Page 29
Image 28
Page 27 Page 29
Contents Sinar Hy6 Intellectual Property Rights Regarding Photography CopyrightTrademarks Advice for Using This Manual General Advice and Structure of the ManualReferences AbbreviationsStructure of the manual Advice for Using this Manual Introduction Safety Information Sinar Hy6-e75 Sinar Hy6-e54 Sinar Hy6 m54Assembly Instructions for the Camera Inserting and removing the battery Charging the batteryShooting Mode Operational Elements at the Hand GripViewfinder Display 10.1Shooting Modes 14.1 Flash Operation with the Sinar Hy6 System 14.2Options Introduction General Advice Spare parts and accessoriesRead the manual Operate the camera as intendedDo not open the camera case Handle the camera with careAvoid strong magnetic fields Avoid contact with sand, dust, toxic gas, water etcDo not touch the internal parts of the camera Do not use the camera under waterCleaning of the camera Use the lens protection capDo not store the camera near heat sources Store the camera out of the reach of childrenKeep the battery and the battery charger away from fire Keep the battery and the battery charger away from waterDo not use damaged cables and accessories Do not let cables trail across the floorScope of Delivery Sinar Hy6-e75120 VAC, and a VDC car cigarette lighter cable Sinarback 54 MC including protection cover Sinar Hy6 Camera and its component parts Camera and ITS Component Parts Flash connection socket SCA-compatible Assembly Instructions for the Camera To open the waist-level viewfinder, pull it upwards Lever of the magnifying glass 90 reflex viewfinder 10 Attachment of the lens 11 Protection cover E54 LV 13 Assembly of the Sinarback eMotion 15 Attachment of the Sinarback eMotion 17 Sinarback 54MC with adapter kit 21 Adjustment of the hand grip 25 IEEE-1394 socket at the back 27 Focusing screen Frame. Place the format mask exactly onto Your Sinar Hy6 system Adjusting the Hand Strap 34 Adjust hand strap Working with a tripodBattery Inserting and removing the batteryBattery charger First Use of the Sinar Hy6 System First USE Operational Elements the Camera Functions at a Glance Operating Elements Operational Elements at the Camera Body Operational elements at the camera bodyExposure Mode Control Wheel W2 to set the shutter speed Light Metering Mode Light MeteringAuto Focus Auto Focus ModeSingle Factory Reset Flash OptionsHot Shoe Measurement is possibleFocus and Focus Indication at the Lens 14 Focus indication at the lensEasy Mode Easy ModeEnhanced Mode Display in Enhanced Mode3 4 5 6 7 8 Focusing Auto Focus Single and Auto Focus ContinuousManual Focus Manual Focusing 10.2.2Display Focus Setting Focus Indication in the Viewfinder DisplayExposure Light Metering Modes Introduction Operational Area Light MeteringSpot Light Metering Centre-weighted Light Metering Operational Area Exposure Modes Exposure Exposure Modes Light balance in the hand grip and the viewfinder display Select Bulb with the Rear Control Wheel W2 Display AE-Lock Enhanced Mode Exposure Exposure Compensation Exposure Setting the ISO-SPEED Shooting Modes When the shutter is released, the display changes Menu Shooting / Self-Timer Menu Shooting Focus Trap Menu Shooting Ultra Fast Using the Front Control Wheel W1 Function with the Rear Control Wheel W2Select the exposure deviation Number of images in the bracketing seriesWhen bracketing is started, the display settings change Focus Bracketing is only possible with AF or AFD-lenses Mirror Up Interface Hot Shoe TTL-Flash Measurement and SCA-interfaceHot shoe X-contact Normal Flash CompensationOptions Set the enhanced or the easy GUI as standardMenu Options Controls Release button Key lock Menu Options Firmware version11 Menu Options Voltage status Remove the cover Attach the magazine frameOpen the magazine Take out film insertLoad a film Insert the film insertClose the film magazine Close fílm magazineCleaning and Maintenance Technical Data Connections TTL flash metering on the film plane 5x6 cm Film magazine 4560 with integrated laminar drawslide

Hy6 specifications

The Sinar Hy6 is a medium format camera that has garnered a reputation among photographers for its innovative design and advanced features. Characterized by its modular system, the Hy6 is ideal for both studio and location work, offering flexibility and ease of use that encourages creativity.

One of the standout features of the Sinar Hy6 is its digital back compatibility. Designed to accommodate a range of digital backs, including those from Sinar itself and other manufacturers, the Hy6 ensures that photographers can use the latest imaging technologies without being tied to a specific system. This flexibility allows artists to choose the digital back that best suits their workflow, whether they prefer CCD or CMOS sensors.

The camera boasts an impressive modular system which allows users to interchange various components. The camera body can be paired with different viewing platforms, including a waist-level viewfinder or an eye-level finder, catering to various shooting styles. Additionally, users can easily change lenses, supporting a variety of focal lengths including wide-angle, standard, and telephoto options. This modularity not only enhances functionality but also enables users to customize their kit according to specific projects or personal preferences.

Moreover, the Sinar Hy6 incorporates cutting-edge technologies such as an electronic shutter which facilitates silent operation, making it particularly suitable for sensitive environments. This electronic shutter can also synchronize with flash at high speeds, allowing for greater creative possibilities in studio and outdoor settings. The camera’s precise metering system aids photographers in achieving accurate exposures, even in challenging lighting conditions.

Another notable characteristic of the Sinar Hy6 is its ability to capture stunningly detailed images with a wide dynamic range. The medium format sensor produces high-resolution files that are ideal for large prints and detailed editing, ensuring that photographers achieve the desired quality for professional work. The camera also supports advanced imaging techniques, such as focus stacking, which is particularly useful in product photography and macro work.

In conclusion, the Sinar Hy6 represents a blend of innovation, flexibility, and high-quality performance in the medium format landscape. Its modular design, compatibility with various digital backs, and advanced imaging technologies make it a powerful tool for professionals seeking exceptional results in their photography endeavors. Whether in the studio or on location, the Hy6 stands out as a versatile option for capturing stunning images.
Top Page Image Contents