Profoto D1 1000 Air, D1 500 Air Sync via cable, Sync via IR, Sync via radio D1without Profoto Air

Page 15

Sync via cable

1. Connect a sync cord from the camera to the Sync Connector [12] on the D1 unit.

Sync via IR

1. Press and hold down the Slave Button [8a] until the IR Indicator [8c] is illuminated.

Sync via radio (D1without Profoto Air)

1.Connect a ProfotoAir Remote or ProfotoAir Sync device (Receiver) with a cable to the Sync Connector [12] on the D1 unit.

2.Follow the instructions for genera tors without built-in Profoto Air receiver in the Profoto Air Remote/ProfotoAir Sync User’s Guide.

Sync via radio (D1with Profoto Air)

1.Press and hold down the Slave Button [8a] until the RADIO Indicator [8b] is illuminated.

2.Select radio channel by following theRadio settings instructions below.

3.Connect a ProfotoAir Remote or ProfotoAir Sync device to the camera.

4.Follow the instructions for generators with built-in ProfotoAir receiver in the Profoto Air Remote/ProfotoAir Sync User’s Guide.

Radio settings (D1with Profoto Air)

For sync via radio,the same radio channel has to be set on the D1 unit and the ProfotoAir device or the Profoto StudioAir program.

For remote control using ProfotoAir Remote, the same radio channel and group have to be set on the D1 unit and the ProfotoAir device.

For remote control using ProfotoAir USB and Profoto StudioAir, the same radio channel has to be set on the D1 unit and in the Profoto StudioAir program.

1.Verify that the RADIO Indicator [8b] is illuminated on the D1 unit.

2.Press the Channel Set Button [6]. The Display [1] will start flashing, showing the current radio channel number to the left and the radio group letter to the right.

3.While the Display [1] is flashing,turn theSetting Knob [7] clockwise to increase the radio channel number 1( to8) and counter-clockwise to decrease the number.

4.While the Display [1] is flashing,press and hold down and turn the Setting Knob [7] clockwise to increase the group letterA( toF) and counter-clockwise to decrease the letter.

5.Wait until the Display [1] stops flashing(The. Display [1] will now show the energy level of the flash light.)

For radio channel and group settings on the ProfotoAir devices and the Profoto StudioAir program, please refer to the corresponding User’Guide.

AirStudio

Profoto–

USBAir

Profoto

15

www.profoto.com

Image 15
Contents D1 1000 Air D1 500 Air D1 250 Air AirStudio Profoto Thank you for choosing Profoto Safety Precautions Safety instructionsTable of Contents Profoto Air System descriptionProfoto Studio Air Profoto Air RemoteProfoto Air Sync Profoto Air USBNomenclature Slave SettingSync Connector Locking Knob Sync signaling Energy controlModeling light Ready signaling Ready indicator/Test functionFlash before ready Umbrella Remote controlColor temperature ReflectorOperating instructions Ready signaling setting Modeling light settingSync via radio D1without Profoto Air Radio settings D1with Profoto AirSync via cable Sync via IRTurn off unit Maintenance Changing flash tube and/or modeling lampClasp Flash tube Modeling lamp Changing built-in fuse Adaptive thermal control 500 1000 Air500 Air 250 AirSynchronization modes This page is intentionally left blank This page is intentionally left blank Change without notice
Related manuals
Manual 24 pages 25.32 Kb