TRENDnet TV-IP602WN Hardware Installation and Configuration, Click Setup Wizard, Click Close

Page 4

2. Hardware Installation and Configuration

Note: It is recommended that you configure the IP Camera from a wired computer.

1.Insert the Utility CD-ROM into your CD-ROM drive.

2.Click Run autorun.exe (Windows 7/Vista only).

3. Click Setup Wizard.

4.Click Next. Then follow the Setup Wizard instructions.

5. Click Close.

2

Image 4

Contents TV-IP602WN Table of Contents Package Contents Before You StartClick Setup Wizard Hardware Installation and ConfigurationClick Close Double click on the SetupWizard icon on your desktop Select Dhcp and then click Next Select By using wireless and then click Next Click NextInstall ActiveX Control Register Your Product Troubleshooting When I click on Live View the image does not load?Forgot my password. What should I do? Wireless Tips Assign your network a unique SsidDo not turn off the Ssid broadcast Change the channelPage Page Page Page Page Copyright 2011. All Rights Reserved. TRENDnet