Samsung SCD903 manual Controlling Sound from the Speaker, Adjusting the LCD during Play

ENGLISH

Basic Recording

Adjusting the LCD during PLAY

✤You can adjust the LCD during playback.

✤The adjustment method is the same procedure as used in CAMERA mode. (see page 32)

Controlling Sound from the Speaker

The Speaker works in PLAYER mode only.

■When you use the LCD screen for playback, you can hear recorded sound from the built-in Speaker.

- Follow the instructions below to decrease or mute speaker volume in the PLAYER mode.

1.Set the power switch to PLAYER mode.

2.Press (PLAY/STILL) to play the tape.

3.When you hear sounds once the tape is in play, use the MENU SELECTOR to adjust the volume.

■A volume level display will appear on the LCD.

Levels may be adjusted from anywhere between 00 to 19.

■If you close the LCD while playing, you will not hear sound from the speaker.

2

3-1

<3-2>

0 : 2 3 : 4 7

5 5 min

Note

■When the cable is connected to the Audio/Video jack, you cannot hear sound from the speaker and cannot adjust the volume.

VOL.	[ 1 1 ]	1 0 : 0 0 A M
		J A N . 10 , 2 0 0 4

35