Samsung SCX-RD100 user manual Switch Setting Table

Connection & Control

SWITCH SETTING TABLE

❖Use a combination of pin 1,2,3,4 of the Protocol setting switch to select a protocol.

	ON			ON
	1	2		1	2	3	4	5	6	7	8
TERMINATION					PROTOCOL								HALF : half-duplex
													FULL : full-duplex
Protocol Setting Switch (0 :r, 1 :q)												Protocol	HALF/FULL
Pin 1			Pin 2	Pin 3					Pin 4
0		0		0				0				SAMSUNG	HALF
1		0		0				0				SAMSUNG	FULL
1		1		0				0				PANASONIC	HALF
0		0		1				0				PANASONIC	FULL
1		1		1				0				PHILIPS	HALF
1		0		0				1				KALATEL	HALF
0		1		0				1				ERNA	HALF
1		1		0				1				DIAMOND	HALF
0		0		1				1				VCL TP	HALF

ƒ By default, it is configured to support SAMSUNG and PANASONIC.

NOTE For other protocols, you can find assistance from our website at: http://www.samsungsecurity.com

❖Use pin 7 and 8 of the Protocol setting switch to set the coaxial output.

ON	PIN 7	Output Selection
	ON	COAXIAL out
1 2 3 4 5 6 7 8
PROTOCOL	OFF	RS-485 out

	PIN 8	RS-232 input
ON
1 2 3 4 5 6 7 8	ON	RS-232 input
PROTOCOL	OFF	RS-232 No use

ƒ RS-232 and RS-485 communications cannot be used for simultaneous input.

NOTE

ENG

English 17