Samsung SCX-RD100 user manual Checking Installation Environment, Installation Precautions

Page 11

Installation

CHECKING INSTALLATION ENVIRONMENT

Please check the following instructions before installation for your safety.

The way of connecting the main product with external devices (COAXIAL BNC) is very important to build up a proper system.

Do not disassemble the unit; doing so could expose you to dangerous high voltage points.

INSTALLATION PRECAUTIONS

Make sure you turn off the product before installation.

Do not put a strong force on or shake the product; otherwise it may cause malfunction.

Keep the product away from areas of strong magnetic field or electric interference, or wireless devices such as radio or TV set.

Keep clean the installation place during and after the installation.

An abnormal smells from the product is a sign of abnormal condition, which may cause fire or electric shock. In this case, disconnect the product from the main power immediately and contact the retailer for technical help from authorized servicing.

Keep the product away from a wet floor, do not use an unearthed power extension cable, worn-out power cord, neither forget earth-grounding.

Use a dry cloth only to dirt off the product. If the product is badly dirty, apply neutral detergent on a cloth that is used to dirt off, and wipe it out with a dry cloth.

Do not use volatile substances such as alcohol, benzene or thinner as these may damage the finish.

ENG

English 11

Image 11
Contents SCX-RD100 Risk of Electric Shock Do not Open Safety informationENG Important Safety Instructions Contents List of controllable models FeaturesIntroduction IntroductionFront Panel Part Names and FunctionsAddress Rear Panel AA BatteryTop P q rInstallation Precautions Checking Installation EnvironmentTo Control the Camera Coaxial Communications Control of pan/tilt/zoom using the keys is not supportedConnection & Control ƒ Input of video signal is required to control RS-485 VIA Coaxial Communications To Control the Camera Using RS-485 Signal Output Connection & Control Switch Setting Table See the following table to set the baud rate Erna Baud Rate PIN Specifications SpecificationsDimensions Correct disposal of batteries in this product