Sharp VL-A10H operation manual Specifications, Viewcam

Page 62

References

Specifications

VIEWCAM

Signal System: PAL standard

Recording System: 2 rotary heads, helical scanning system Cassette: 8 mm video tape, MP type

Recording/Playback Time: 120 minutes (P5-120) Tape Speed: 20.051 mm/second

Pickup Device: 1⁄4 ″ (6.4 mm, effective size: 4.5 mm) CCD image sensor (with approx. 320,000 pixels including optical black)

Lens: 16× power zoom lens (F1.4, f=4.0–64.0 mm), and full-range auto focus

Lens Filter Diameter: 46 mm

Monitor: 3″ (7.5 cm) full-colour LCD screen (TFT active matrix) Microphone: Electret monaural microphone

Colour Temperature Compensation: Auto white balance with white balance lock Minimum Illumination: 0.8 lux* (with gain-up, F1.4)

Video Output Level: 1.0 Vp-p 75-ohm unbalanced

Audio Output Level: −8 dBs, impedance less than 2.2 kohms Speaker Output: 200 mW

Power Requirement: DC 3.6 V (with battery pack) DC 7.0 V (with AC adapter)

Power Consumption: 4.9 W (during camera recording in full auto mode with zoom motor off and backlight in normal mode)

Operating Temperature: 0°C to +40°C Operating Humidity: 30% to 80%

Storage Temperature: −20°C to +60°C

Dimensions (approx.): 183 mm (W) × 109 mm (H) × 99 mm (D)

Weight (approx.): 710 g (without battery pack, lithium battery, video cassette, and lens cap)

AC Adapter (UADP-0313TAZZ)

Power Requirement: AC 110–240 V, 50/60 Hz

DC Output: 7.0 V

Power Consumption: 15 W

Dimensions (approx.): 68 mm (W) × 37 mm (H) × 130 mm (D)

Weight (approx.): 233 g

Specifications are subject to change without notice.

*Minimum illumination: Since there is no widely accepted testing procedure for determining minimum illumination capability, lux ratings are comparable only between models from the same manufacturer.

References

55

Image 62

Contents VL-A10H Power supply Special Note for Users in the U.K Blue Neutral Brown LiveAvoid placing Do not aim the lens at the sunAvoid shocks and dropping AC Adapter CleaningLCD Monitor Screen Remote control × Battery packCR2025 type Audio/video cable Lithium battery IiiTripod adapter For 180 recording Soft caseContents References Useful FeaturesAdvanced Features Gamma Brightness CompensationOperation Summary When the cassette compartment door is openPart Names Cassette compartment door pRear view Remote sensor pOn-screen Display Index Camera ModeVCR Mode 35 pQuick Reference Index Video cassette is defective and should be Removing the Battery Pack Battery PackInserting the Battery Pack Inserting and RemovingCharging the Battery Pack Recording and playback timesPowering the Viewcam from an AC Outlet Removing a Cassette Inserting and Removing a CassetteInserting a Cassette Perform above, then take out the cassetteBattery Installing the LithiumMemory Battery Removing the Lithium BatteryPress the SET button B Setting the Date and TimeChanging to the 12-hour Time Mode Attaching and Removing the Lens Cap Using the Hand Strap and the Lens CapAttaching the Shoulder Strap LCD screen sideClosing the Sun Hood Using the Sun HoodAttaching the Sun Hood Opening the Sun HoodTo Pause Recording Easy Camera Recording with Full Auto ModeTo Turn the Power Off Maximum Continuous Recording and Actual Recording TimesBasic Operations Camera Recording ZoomingTips on Recording Positions Remaining Recording Time Display Remaining Battery Power DisplayApprox. remaining On-screen Recording time Indicator Asic Operations Volume ControlPlayback YbackWatching the Playback on a Turn on the Viewcam in VCR mode, and begin tape playback seeBasic Operations Playback Video SearchStill Menu button Useful FeaturesOperations of the On-screen Controls Display buttonPress the or button C or D to select the desired menu item Desired settingPress the SET button B to select Perform steps 4 to 6 abovePress the SET button B to select AUTO, ON, or OFF Recording the Date and TimePress the or button to select Display Press the button to select SelectFade In and Fade Out Selecting Fade ModeUsing Fade Mode Type of Fade ModesTo use fade out only To cancel Fade modeQuick Review Quick Return Edit Search Recording Standby mode, press Menu button until appearsTo obtain a brighter picture To cancel Gamma Brightness CompensationGamma Brightness Compensation Press the Gama EFF. button a againTo cancel the gain-up function Gain-up Cat’s EyeRemoving the Lens Hood Wide ScreenMacro Shots To return to normal pictureMore Information on Self Recording Self RecordingNormal Self Recording To pause recording, press the REC Stop button BTo turn off the self-recording message screen Press the Message button in Recording Standby modeSelf-recording Message Setting the Viewcam to Full Auto Mode Useful FeaturesProgram Search To reset the counter to zero Tape Counter FeatureUsing the Counter To turn off the tape counterPress the Play button D to view the desired scene Using the Counter MemoryDuring playback, press the Menu Button until appears Installing the Batteries in the Remote Control Using the Remote ControlOperating the Remote Control Turning On the Remote Control ModeDigital Picture Effects To cancel the digital picture effectAdvanced Features Type of Digital Picture EffectsScene Menu Program AE Type of Scene SettingsTo cancel the scene setting Select Scene Menu in aboveSuperimposing a Title Press the or ß button Q to select Changing the Preset TitlesPress the Reset button to display the title input screen Top of the screen and the cursor willAuto Focus To cancel Manual Focus modeAuto/Manual Focus Manual FocusPress the White BAL. button. White BAL. returns to blue To cancel White Balance LockWhite Balance Lock Perform steps 1 and 2 above, then press the Auto button B To cancel Manual Exposure modeManual Exposure Press the Exit button to turn off the adjustment screen Picture/Backlight AdjustmentsPress the Menu button until Camera mode or VCR mode appears Type of Backlight ModesTurning Off the LCD Monitor Backlight To cancel Gamma PlaybackGamma Playback Press the Gama EFF. button again. Gamma disappearsCutting Unwanted Sequences Setting Edit ModeEditing To stop editingLighting Useful InformationHints for Better Shooting Tips on Good LightingDew Formation Dirty Video HeadsBattery Pack Replacing the Fluorescent LampUse only tapes with the mark with this Using Your Viewcam AbroadReferences Video Cassette Tapes Button and slide Power switch to Demonstration ModeCancelling Demo Mode Watching the DemonstrationBefore Requesting Service Power Camera mode Symptom Possible cause Suggested solutionVCR Specifications Viewcam0P06-M-G