Appendix
Picture/Backlight
Adjustments
If the picture is difficult to see due to ambient light or other factors, adjust the monitor picture settings.
•The example screens shown are for CAMERA mode.
Adjusting the Backlight
1 Press the MENU button until the menu screen appears.
2 Press l or m on the operation button to select O, then press the SET button.
3 Press l or m to select “BACKLIGHT”, then press the SET button.
Adjusting the Picture
1 Press the MENU button until the menu screen appears.
2 Press l or m on the operation button to select O, then press the SET button.
L C D S E T
B A C K L I G H T A U T O
L C D B R I G H T
L C D C O L O R
R E T U RN
3 Press l or m to select “LCD BRIGHT” or “LCD COLOR”, then press the SET button.
4 Press l or m to adjust the item to the desired setting.
LCD BR I GHT
Darker
Brighter
LCD COL OR
Decrease
Increase
5 Press the SET button, then press the MENU button to turn off the menu screen.
Note:
•When adjusting the color, the picture on the LCD monitor may differ from the picture actually recorded. Do not change the color setting unless necessary. (This adjustment only affects the monitor picture, not the recorded image.)
L C D S E T
B A C K L I G H T A U T O
L C D | B R I G H T | N O RMA L |
L C D | C O L O R B R I G H T | |
R E T U RN | O F F | |
4 Press l or m to select “AUTO”, “NORMAL”, “BRIGHT” or “OFF”, then press the SET button.
B ACKL I GHT BR I GH T
AUTO: The camcorder automatically switches between “NORMAL” and “BRIGHT” depending on the ambient light. This mode is only available in CAMERA mode.
NORMAL: For use indoors or under moderate lighting conditions.
BRIGHT: For use outdoors under strong lighting conditions, such as bright daylight.
OFF: The backlight turns off. To turn it
on again, press the MENU button.
5 Press the MENU button to turn off the menu screen.
Appendix
48