Sharp VL-NZ50U Editing with the DV Terminal IEEE1394, To Record to Video Equipment

Page 57

Editing with the DV Terminal (IEEE1394)

This camcorder enables you to perform digital video editing. Connect the camcorder to video equipment with a DV terminal using a commer- cially available DV cable. A DV cable is able to transfer all dubbing signals including video and audio.

To Record to Video Equipment

See “Cutting Unwanted Sequences” on page 43, using the video equipment as the recording source.

Note:

•Make sure that the video equipment to which you are recording can input dubbing signals via the DV terminal.

To DV terminal

Video equipment

with DV terminal

 

(e.g. DV camcorder)

DV cable (commercially available)

To DV terminal

To Record from Video Equip- ment

1 Set the camcorder to VCR mode, and insert a Mini DV cassette.

2 Begin playback on the video equipment connected to the camcorder.

•Check the camcorder screen to see if the picture is properly received.

3 Press the REC START/STOP button on the camcorder.

•The camcorder enters Recording Standby mode.

4 Press m on the Operation button to begin recording.

To stop recording

Press l on the Operation button.

Cutting Unwanted Sequences

1 Press m to pause recording when the source tape reaches the beginning of the sequence to be cut.

2 Press m to resume recording when the

source tape reaches the end of the sequence to be cut.

Notes:

•Make sure that the video equipment from which you are recording can output dubbing signals via the DV terminal.

•If the video equipment is not set to playback mode or the DV cable is not properly connected, “NO SIGNAL” is displayed on the camcorder screen.

•If no picture or sound is input to the camcorder even if the DV cable is properly connected and you are playing back the source media from the video equipment, set the Power switch on the camcorder to OFF and then back to VCR, or disconnect the DV cable and connect it again.

•If a digital video recording with a copyright protection signal is used as the playback source, “COPYRIGHT PROTECTED.” appears on the camcorder monitor and the recording function is disabled (see page 51).

•When displaying the playback picture on the recording equipment, you may find black bands around the image. This is caused by the differences of the image display sizes.

•You cannot output the picture playing back from the DV terminal to an external monitor.

Advanced Features

44

Page 56 Page 58
Image 57
Page 56 Page 58
Contents VL-NZ50U Thank you for purchasing this camcorder from Sharp Important Information for Consumers in the U.SSharp Camcorder Specifications are subject to change without noticeIii Important SafeguardsPage Charging the Battery Pack Attaching the Battery PackInserting a Cassette Tips on Recording PositionsHolding the camcorder Easy Camera Recording Volume ControlPlayback Quick Operation GuideViii PrecautionsSupplied Accessories Optional Accessories Contents Xii Useful Features Advanced Features AppendixPart Names Operation ReferencesRear view Battery mounting surface Operation ReferencesWrist strap loop Camera mode VCR modeOn-screen Display Index Example screens shown are for Camera mode On-screen indicators on/offOperation References Manual screens Menu buttonAS S E T T E Preparation Attaching and Removing the Battery PackAttaching RemovingBattery Extending battery pack lifePreparation Powering the Camcorder from an AC OutletInserting and Removing a Cassette InsertingPerform above, then take out the cassette Installing Installing the Lithium BatterySetting Changing Selecting the Language for the On-screen DisplayPress the Menu button to turn off the menu screen 0 0 AM Setting the Date and TimeChanging to the 24-hour Time Mode Using the Lens CapAttaching the Lens Hood Attaching the Wrist StrapTips on Recording Positions To turn the power off Easy Camera Recording in Full Auto ModeBasic Operations To pause recordingMacro Shots Zooming Auto FocusBasic Operations Camera Recording ZoomingRemaining Recording Time Display Remaining Battery Power DisplayTo stop playback Volume ControlVideo Search Still Searching for a Scene Near the Current Tape PositionSearching for a Scene Far from the Current Tape Position Basic Operations Playback Watching Playback on aYou can connect the camcorder to a TV to Allow a larger audience to enjoy playbackUsing the Menu Screens Useful FeaturesTo turn off the menu screen Press the Menu buttonTypes Displaying Recording GuideTurning on the recording guide Selecting the recording guideTo use optical zoom only Setting the Digital ZoomSelect OFF in above Press lor mto select 40 or 300, then press the SET buttonTo cancel Gamma Brightness Compen- sation Useful features Camera RecordingGamma Brightness Compensation To obtain a brighter pictureTo cancel the gain-up function Press the GAMMA/BRIGHTER button again Eindicator appearsGain-up To cancel Fade mode UsingFade In and Fade Out To use Fade Out onlyA R C H Quick Return Edit SearchTo cancel the still image Still RecordingAttaching the Supplied Tripod Adapter Wide Screen To cancel DIS functionDigital Image Stabilization DIS To return to normal screenMore Information on Self Re- cording Self RecordingRecording in LP Long Play Recording Mode To return to SP modeSelect SP in above To return to 12-bit audio recording mode Selecting the 16-bit Audio Recording ModePress l or m to select 16bit, then press the SET button Select 12bit in aboveInstalling the Batteries Using the Remote Control Not suppliedActivating OperatingTo cancel Gamma Playback Useful Features PlaybackDisplaying the Date and Time of Recording Gamma PlaybackPicture Effect Playback To cancel Picture Effect PlaybackAdvanced Features To return to Auto Focus modeManual Focus To return to Auto Exposure mode Manual ExposurePress the Manual button until the normal screen appears Advanced Features Camera Recording Setting the Camcorder to Full Auto modeTo return to Auto White Balance mode White Balance LockDigital Picture Effects To cancel the digital picture effectScene Menu Program AE To cancel the scene settingDisplay format Using the Time CodeDisplaying the time code on a TV during playback To turn off the time codeEditing Advanced Features PlaybackCutting Unwanted Sequences To stop editingTo Record to Video Equipment Editing with the DV Terminal IEEE1394To Record from Video Equip- ment To stop recordingNormal recording mode Audio Dubbing FeatureAudio Dubbing mode Audio RecordingAudio Dubbing To cancel audio dubbingTo pause audio dubbing Press the Menu button. The audio dubbing screen disappearsSelecting the Audio Playback ModePress l or m on the operation button To select V, then press the SET buttonAdjusting the Backlight Picture/Backlight AdjustmentsAdjusting the Picture AppendixTurning off Confirmation Sound AppendixPress l or m to select OFF, then press the SET button Useful Information Use a wide-angle setting for fast-moving subjectsHints for Better Shooting LightingDV and conventional video cassette tapes Appendix DV Technology Copyright ProtectionMini DV Cassette Precautions when using a Mini DV cassetteAC Adapter Replacing the Fluorescent LampThis camcorder uses a lithium-ion type battery pack Appendix Battery PackCharging StorageDew Formation What is dew formation?Using a Cleaning Tape Commercially Available Appendix Dirty Video HeadsCauses of video head clogging AC Adapter Supplied Accessory Cleaning Using Your Camcorder AbroadDemonstration Mode Canceling Demo ModeWatching the Demonstration Symptom Possible cause Suggested solution Before Requesting ServiceVCR mode General Symptom Possible cause Suggested solution Specifications Service Information For the U.SCamcorder InformaciónimportanteparalosconsumidoresdelosEE.UU Guía de operación rápida en españolPuede deformar la Videocámara o hacer que ésta funcione mal PrecaucionesLa compañía eléctrica local. Para los Utilícelo solamente Con un carritoProductos que van a ser utilizados con Energía de baterías u otras fuentesNotas acerca de la utilización de la pila de litio Colocación de la batería Carga de la batería Guía de operación rápidaInserción de un casete Sugerencias sobre las posiciones de grabaciónSujeción de la videocámara Grabación fácil con la videocámara Control de volumenReproducción Guía de operación rápidaVisualizaciones en pantalla en español Modo CameraModo VCR Mode Camera Mode VCRAffichages sur écran en français Page 02P01-JKG Valid for warranty service in the U.S. only

VL-NZ50U specifications

The Sharp VL-NZ50U is an innovative camcorder that captures the essence of advanced video technology in a compact and user-friendly design. Known for its remarkable features, this device appeals to both amateur videographers and seasoned professionals looking for a reliable solution for their recording needs.

One of the standout characteristics of the VL-NZ50U is its high-resolution image sensor, which offers superior video quality. This camcorder supports recording in 1080p HD, delivering crisp and clear visuals that enhance the viewing experience. The video clarity is complemented by its built-in digital image stabilization technology, which minimizes blurriness and shakes, ensuring that every shot is stable and smooth.

The VL-NZ50U incorporates a powerful zoom lens, granting users the ability to capture distant subjects without sacrificing detail. With its optical zoom capability, users can experience up to a 10x optical zoom, providing versatile shooting options suitable for various scenarios—from close-ups to wide-angle shots. The camcorder also features a macro mode, enabling impressive close-up shots of small objects, making it ideal for nature enthusiasts and hobbyists.

Another technological highlight of the Sharp VL-NZ50U is its intuitive touchscreen interface. The 3.5-inch LCD display offers easy navigation through settings and playback, allowing users to focus more on their creativity and less on complicated controls. This feature is further enhanced by the camcorder's advanced auto-focus system, which quickly and accurately adjusts to ensure subjects remain in focus, even in challenging lighting conditions.

The battery life of the VL-NZ50U is also noteworthy, as it offers extended recording times, allowing users to capture more content without interruptions. Its lightweight and ergonomic design make it easy to handle during prolonged shooting sessions, reducing fatigue.

Connectivity is a crucial aspect of modern technology, and the VL-NZ50U does not disappoint. It is equipped with various ports, including HDMI and USB, enabling effortless transfer of videos to computers or televisions. Additionally, the ability to connect to external microphones enhances audio quality, a vital factor when seeking to create professional-grade videos.

In conclusion, the Sharp VL-NZ50U camcorder is a versatile tool that combines high-definition recording capabilities with user-friendly features. Its powerful zoom, advanced stabilization, long battery life, and superior connectivity options make it an excellent choice for anyone looking to elevate their videography skills. Whether filming family events, travel experiences, or artistic projects, the VL-NZ50U ensures every moment is captured with extraordinary detail and clarity.
Top Page Image Contents