Kodak 3 manual View Menu, View Options

Page 13

Cintel International Ltd.

diTTo User Guide

Advanced Settings shows the default location of Exposure, Masking and Pre-Scalesetting, these can be changed to copy a set of parameter from different previous projects if required.

Set as default. This will set file folder location from which to extract the Exposure, Masking and Pre-scalesettings for use with the current project.

Restore Defaults. This will reset locations to extract the Exposure, Masking and Pre-scalesettings to those supplied by Cintel International with this software.

Fig 16(b) New Project Window Advanced

View Menu.

This menu provides selection of ways to view both the Main diTTo GUI and the Playback Viewer GUI. It only sets the image display within each GUI.

Fit to Window is the default. In this mode the image, regardless of scanned resolution, will all be fitted within the window.

This allows the whole frame to be observed

Fig 17 View Pull down menu

No Scaling. This mode provides a pixel to pixel match between the scanned image and the display device.

This mode offers a more detailed view of the scanned image. However the user must move the image within the frame to see the whole image.

View Options

This window allows the user to set specific Width and Height Scaling of the Record and Playback windows either by Pixel number or by percentage. Lock Aspect ratio will cause the Width or Height to automatically track its value when only one parameter is adjusted. These settings have no effect on the recorded image.

Range specifies how many of the most significant bits (MSB)

are not to be viewed. This is included as the GUI display can only show, at best, 8 bits. By limiting the MSBs the GUI display can resolve the lesser bits as a check that no lowlight clipping or other artefacts are present on the recorded image. This settings has no effect on the recorded image.

Fig 18 View Scaling Window

Issue 3

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents DiTTo Contents Business Users Declarations of ComplianceOther Countries outside the European Union DiTTo data Scanner DiTToEMC Gland DiTTo Scanner InstallationVirus Protection Power upMain Scan ControlsCurrent timecode location of film on transport` Clip Entry System StatusClip Display Clip ManagementEDL and ALE Import to create clips Filename, Resolution, Exposure, Masking and Pre-scaleClip Editing Colour Indication of Clip Display Conform in progress File New Project File MenuGeneral View Options View MenuTools Playback Tools MenuPlayback Viewer Prescale Masking Exposure SCO Control If option is fittedTools Pre-Scale Control Tools Masking Control. See also Appendix Tools Exposure Control Tools Dmin Calibration Minimum Density settingSelect Auto Shading Correction Tools D/SCO Control If Option is fitted Settings Site EDL List Settings Site GeneralSettings Site File Name Description of Film Transport Transport Safety InterlockLace Position Lacing filmIssue S16mm Film Gate option Perf Gate OptionPins UP Pins DownStop / Unload Forward FWDLoad Transport Tension Gate Lacing35mm Keykode Reader Optional For safety information about this option refer to AppendixFilm Gate Removal MaintenanceTransport Film Path Rollers and Gate Camera and illumination LensesParticle Transfer Rollers PTR’s Specification Do we have to record to the Local RAID? What is Intelligent Network Transfer?Cintel Asia Pacific Cintel IncMains Inlet LED Machine Status InformationTK1058-B3 M102750-AA1Cintel International Limited SOFTWARE/FIRMWARE LIC Ence For B/W Film settings Resolution 2K Colour For Colour Film settings Resolution 2K ColourApproximate File sizes for Colour DPX 10 bit LOG data scans 6MB 38.4MB 25GB 135GB 1K data 1024 x 2MB 76.8MB 270GBAppendix Masking Saftey Precautions and FCC ComplianceDisplay Management Appendix Kodak Color ScienceTypical ‘Defect Map’ Workflow Enhancement
Top Page Image Contents