Cintel International Ltd. | diTTo User Guide |
35mm Keykode Reader (Optional)
For safety information about this option refer to Appendix 3
diTTo can be supplied fitted with a Keykode reader, mounted to the left of the film gate. The reader can be adjusted to accommodate keykode on either side of the film.
To adjust, refer to Fig 44. |
|
1. Loosen the locking screw. |
|
2. Move the keykode reader in or out as required. |
|
It is best to run the transport with film containing |
|
the appropriate keycode position while adjusting |
|
the position to ensure corrct readings are being |
|
obtained, by looking at he keykode box on the |
|
GUI. |
|
3. Tighten the locking screw. |
|
∙ For Original Camera Negative (OCN). Position A |
|
∙ For Interpositive (IP) keycode. Position A |
|
∙ For OCN keycode printed on IP. position B** |
|
∙ For OCN Keykode printed via an IP to an |
|
Internegative. Position A |
|
** This is only available if the lab has printed the OCN |
|
keykode correctly on the Interpositive. | Fig 46 Optional Keykode Reader |
Issue 3 | 27 |