Cintel International Ltd. | diTTo User Guide |
LOCAL CONTROLS
The Local Control buttons are arranged like this:
Some of them have dual functions depending on whether you are in ‘Loaded’ or ‘Unloaded’ mode;
LOAD
Loading the film is a 2 stage process. Press and hold LOAD then confirm with either 
or (see ‘Load transport tension’ below)
STOP / Unload
The Stop button, when already ‘stopped’ further depression of this button “unloads” the transport tens ion.
When diTTo is in Un-Loaded mode;
Pins DOWN.
. Lowers gate stripper plate down, pins film on fixed register pins then parks gate shuttle at extreme LH side.
Pins UP.
Raises stripper plate up, gate shuttle is parked at LH side of centre permitting lacing of film
When diTTo is in Loaded mode;
Forward (FWD)
A single press will cause the transport to advance 1 frame, a continuous press will advance frames until released.
Reverse (REV)
A single press will cause the transport to reverse 1 frame, a continuous press will reverse frames until released.
Issue 3 | 25 |