Kyocera Finecam L3, Finecam L4 Set the number of prints, Set to print the date or not

Using Playback “p” Mode Functions

6Set the number of prints.

1Press Up or Down on the directional keypad to select [PRINT QTY], then press Right on the directional keypad.

SETTING PRINT

PRINT QTY	2
DATE	NOT PRINT
PRINT SETS	EXECUTE

2Press Up or Down on the directional keypad to set the

number of prints, then press the e button.

7Set to print the date or not.

1Press Up or Down on the directional keypad to select [DATE], then press Right on the directional keypad.

2Press Up or Down on the directional keypad to select [PRINT] or [NOT PRINT], then press the e button.

●Use caution when selecting "PRINT". When [PRINT] is set to the [INSERT DATE] (page 81) in the setup mode and [PRINT] is rese- lect in this mode, the date printing is doubled.

8Press Up or Down on the directional keypad to select [PRINT SET], then press Right on the direc- tional keypad.

9Press Up or Down on the directional keypad to select [EXECUTE], then press the e button to complete the DPOF setting.

●If you select [RETURN], changes will not be applied to the set- ting and the display returns to the [SETTING PRINT] screen.

The display returns to the [SETTING PRINT] screen.

●To set the DPOF setting for other images, repeat steps 4 to 9.

SETTING PRINT

PRINT QTY	2
DATE	NOT PRINT
PRINT SETS	PRINT

SETTING PRINT

PRINT QTY	2
DATE	NOT PRINT
PRINT SETS	EXECUTE
		p
SETTING PRINT
PRINT QTY	2
DATE	RETURN
PRINT SETS	EXECUTE

SETTING PRINT

PRINT	SEL IMAGE
INDEX	SET
ALL RESET	EXECUTE
RETURN
DPOF	2 PCS
INDEX SETS	OFF

77