Kyocera L3, L4 Custom SET. Setting a function to the + and button, Operation setting to EX Comp

Also when setting [LCD BRIGHT] or [W BALANCE], refer to the procedure below. Turn on the power and set the mode select dial to “SETUP”.

Using Setup “SET UP” Mode Functions

[CUSTOM SET.] Setting a function to the (+) and (–) button.

You can set the functions for handling any of the [LCD BRIGHT], [EX COMP] or [W BALANCE] to the + and – buttons.

By pressing these buttons on [Multiple Image Display] in camera modes “s” or in movie modes “m”, the function set just before shooting can be controlled.

[LCD BRIGHT]	The brightness on the LCD monitor can be changed in 9 levels.
(default)
[EX COMP]	The exposure can be controlled from –2.0 to +2.0 in 0.1 (EV)
	increments.
[W BALANCE]	An adequate White Balance type (AUTO,	,	,	,

, ) can be selected.

Operation — setting to [EX COMP]

●

1

2Press the Up or Down button on the directional key- pad and select [CUSTOM SET.]. Then, press the Right button on the directional keypad.

3Press the Up or Down button on the directional key- pad and select [EX COMP]. When the setting is completed, press the execute button.

SET UP(2/3)

MODE LOCK	OFF
BEEP	LCD BRIGHT
CUSTOM SET.	EX COMP
COLOR SELECT	W BALANCE
START SCREEN	SET
SET UP(2/3)
MODE LOCK	OFF
BEEP	ON
CUSTOM SET.	EX COMP
COLOR SELECT	YELLOW
START SCREEN	SET

4For the operation of the (+) or (-) button, see the fol-

lowing pages.

[LCD BRIGHT]: page 86.

[EX COMP]: page 86.

[W BALANCE]: page 87.

SET UP

85