Kyocera Finecam L4, Finecam L3 Operation setting to 1MIN, When Power Save is set to no PWR OFF

Turn on the power and set the mode select dial to “SET UP”.

Using Setup “SET UP” Mode Functions

Operation — setting to [1MIN.] 1

2Press Up or Down on the directional keypad to select [POWER SAVE], then press Right on the directional keypad.

3Press Up on the directional keypad to select the length of time before power is turned off, then press the e button to complete the setting.

<Note regarding camera used in the “s/m” mode:>

SET UP(1/3)

BRIGHT CNTRL	NO PWR OFF
DATE	15SEC.
INSERT DATE	1MIN.
FORMAT	3MIN.
POWER SAVE	6MIN.

When using the camera in the “s/m” mode, the auto power-off setting will cause the camera to respond as follows:

1 When [POWER SAVE] is set to one of [15SEC], [1MIN], [3MIN] and [6MIN]:

With this setting, if the camera is left inactive for more than the specified period of time, it will automatically enter the sleep mode for two minutes, after which the power will turn off. During the two-minute power-save sleep period, the camera can be quickly restored to its original shooting mode by depressing the shutter button halfway, or by pressing one of the other function buttons.

After the two minutes have expired, the camera power will automatically turn off.

2 When [POWER SAVE] is set to [NO PWR OFF]:

With this setting, when the camera is left inactive for more than six minutes, it automatically enters the sleep mode. (In this case, the camera remains in the sleep mode indefinitely, without the power turning off.) To restore the camera to its normal shooting mode, depress the shutter button halfway, or press one of the other function buttons.

15SEC.	15SEC.	2MIN.
1MIN.
	1MIN.	2MIN.
3MIN.
		3MIN.	2MIN.
6MIN.
		6MIN.		2MIN.
NO PWR OFF
		6MIN.

Power on and camera in ready but inactive state.

Sleep mode; camera operation stops with lens in extended position, but function can be restored by pressing the shutter button halfway, or by pressing other function buttons.

Power OFF.

SET UP

83