Kyocera Finecam L3, L4 Color Select Setting the Color of Menu Display, Operation setting to RED

The LCD display indicates [

●

].

Using Setup “SET UP” Mode Functions

Operation

Turn on the power first and set the [CUSTOM SET.] in Setup modes to [W BALANCE].

1 Set the mode select dial to “s” or “m”.

2 Select the white balance type by pressing the (+) or (–) button.

When pressing the (+) button

When pressing the (–) button

AUTO

SET UP

Example when setting the white balance

to [ ] Bright sun

●The white balance setting determined with the (+) and (–) buttons will be cancelled and returned to the setting in the menu of the Camera or Movie modes when any of the following operations are executed. To fix the white balance (while the power switch is turned on), set the value using [WB] (page 55) in the camera modes or the movie modes.

·Pressing the menu button

·Turning the mode select dial to switch over to other modes

·Turning off the power switch

[COLOR SELECT] Setting the Color of Menu Display

[YELLOW] (default)

[RED]

[PURPLE]

[BLUE]

Operation — setting to [RED]

1	Turn on the power and set the mode select dial to “SET UP”.
2	Press Up or Down on the directional keypad to
	select [COLOR SELECT], then press Right on the	SET UP(2/3)
	directional keypad.
		MODE LOCK	ON
		BEEP	YELLOW
3	Press Up or Down on the directional keypad to	CUSTOM SET	RED
		COLOR SELECT	PURPLE
		START SCREEN	BLUE

select [RED], then press the e button to complete the setting.

88