Kyocera L4, Finecam L3 Format Formatting the Memory Card, Operation to format a memory card

Turn on the power and set the mode select dial to “SET UP”.

Using Setup “SET UP” Mode Functions

[FORMAT] Formatting the Memory Card

Use this function before using a new memory card or when erasing all data including images.

Operation to format a memory card. 1

2Press Up or Down on the directional keypad to select [FORMAT], then press Right on the direc- tional keypad.

3Press Up on the directional keypad to select [EXE- CUTE], then press the e button to begin format- ting.

4When formatting is completed, the display returns to the [SET UP(1/3)] screen.

●Note that protected images will also be erased.

●If you want to record the image from the file [KIF_0001.jpg] in the folder [100KCBOX], remove the memory card after formatting and follow the “Resetting File Number” (page 91).

SET UP(1/3)

BRIGHT CNTRL	STANDARD
DATE	2003.08.15
INSERT DATE	NO DATE
FORMAT	EXECUTE
POWER SAVE	3MIN

FORMATTING?

EXECUTE

CANCEL

SET UP

[POWER SAVE] Saving Power by Turning Power Off Automatically

This camera is equipped with an Auto Power-off function that automatically turns the power off after several minutes if the camera is left on without any operation being performed. This function helps to reduce power consumption if you forget to turn off the camera. You can select the length of time before power is turned off.

[NO PWR OFF]	The power will be paused after 6 minutes, but it will not be turned
	off automatically. Do not forget to turn off the camera.
[15SEC.]*	The power will be turned off automatically if the camera is left
[1MIN.]	inactive for more than 15 seconds, 1 minute, 3 minutes, or 6
	minutes.
[3MIN.]
[6MIN.]

*In the Playback mode or the Set Up mode, the power is automatically turned off after 1 minute.

82