Toshiba IK-53V instruction manual Camera Parts and Functions, Top/Bottom/Front Side

Page 4

2. CAMERA PARTS AND FUNCTIONS

Top/Bottom/Front Side

12

4

1 Lens mount (C mount)

This is used to mount a C-mount type lens or optical equipment.

2 Camera fixing reference hole (top side)

[Top]

3

3 Camera fixing reference hole/Tripod fixing metal screw hole (bottom side)

4 Camera fixing reference hole/Tripod fixing metal screw hole (bottom side)

[Bottom]

5

1 Imaging area

The protection cap is attached on the lens mount portion. After removing the cap, mount the lens. Be careful not to scratch or touch the optical area.

[Front]

3

Image 4

Contents IK-53V/IK-52V FCC StatementContents General Camera Parts and Functions Top/Bottom/Front SideRear Side EnlargedConnections Connector Pin AssignmentsStandard Connection Setting Bit Pin 9 of the 12-pin connec Mode Tor on the rear panelVideo Scanning Modes Partial Scanning OFF All pixels scanningWhen Partial Scanning Mode is on Partial Scanning onElectronic Shutter Description of the Mode Select SwitchNormal Shutter Reset Restart Long Term ExposureExternal Trigger Mode External Trigger Shutter Speed SettingVD OUT*3 Video Index Video Index Pulse Width Trigger SYNC-RESET Picture Output Timing Shutter mode HD input VD input Pulse Trigger SYNC-RESET Picture Output TimingExternal Sync Operation HD/VD Output Amplitude Specifications HD Input SpecificationsVideo Index Output Specifications Trigger Pulse SpecificationsExternal HD/VD Input Phase Specifications Normal modeReset-restart/external trigger mode External VD falling edgeHorizontal Output Waveform Timing Chart Vertical Output Waveform Timing ChartIK-53V Exterior ViewIK-52V Specifications Spectral Sensitivity Characteristics Representative Values