3. CONNECTIONS
Standard Connection
Lens
Image processor
Camera Cable
(optional)
Cautions on Connection
•When connecting the camera cables, be sure to turn off the camera and the other equipment connected.
•When using another lens, the best camera performance of this camera may not be obtained. (For example, low resolution may occur, and flare, ghost or shading may occur)
•Use the DC power source described below.
•Power supply voltage: +10.5V to +15V
•Current rating: More than 830 mA
•Ripple voltage: Less than 50
Connector Pin Assignments
| 1 | 9 |
|
2 | 10 | 8 | Connector: |
|
|
| |
3 | 11 | 12 7 |
46
5
Pin | External synchroniza- | Reset restart | External trigger mode | Internal synchroniza- | |
No. | tion mode (HD/VD) |
|
| tion output signal | |
1 | GND | GND | GND | GND | |
2 | DC+12V | DC+12V | DC+12V | DC+12V | |
3 | Video output (GND) | Video output (GND) | Video output (GND) | Video output (GND) | |
|
|
|
|
| |
4 | Video output (signal) | Video output (signal) | Video output (signal) | Video output (signal) | |
5 | HD input (GND) | HD input (GND) | HD input (GND) | HD output (GND) | |
6 | HD input (signal) | HD input (signal) | HD input (signal) | HD output (signal) | |
|
|
|
|
| |
7 | VD input (signal) | Reset (signal) | VD input (signal) | VD output (signal) | |
8 | GND | GND | GND | GND | |
9 | PART input (signal) | PART input (signal) | PART input (signal) | PART input (signal) | |
|
|
|
|
| |
10 | – | VIDEO INDEX output | VIDEO INDEX output | – | |
(signal) | (signal) | ||||
|
|
| |||
11 | – | – | Trigger pulse input | – | |
(signal) | |||||
|
|
|
| ||
12 | VD input (GND) | Reset (GND) | VD input (GND) | VD output (GND) |
5