Toshiba IK-TF7C Menus, Shutter Electronic shutter, Changing each setting in Manu mode

Page 12

7. 2 Menus

•Select the menu to change the setting by referring the item "7.1 Using the Menus".)

•When the [MENU UP], [MENU DOWN] buttons are pushed, the "→" on the screen moves up and down. Move the "→" to the item to change.

Note:

When performing the mode setting in the menu display while selecting ON in "PART" and E.TRG in "MODE", the display shows normal mode and then the camera returns the setting mode.

( 1 ) SHUTTER (Electronic shutter)

The electronic shutter has three modes; MANU (Manual), SS (Synchro. Scan), E.TRG (External trigger).

Set the "→" to "MODE" and push [DATA UP], [DATA DOWN] button to select the desired mode among "MANU", "SS", "E.TRG".

(1. 1) Changing each setting in MANU mode

Move up down					Set by pushing
By pushing					Set by pushing
By pushing					DATA UP, DOWN
MENU UP, DOWN					DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	MANU
MANU	50000
PART	OFF

<MODE = MANUAL>

(a) Changing the shutter speed

•Shutter mode MANU, SS, E.TRG

•Shutter speed setting

OFF, 100 (1/100s), 250 (1/250s), 500 (1/500s) 1000 (1/1000s), 2000 (1/2000s), 4000 (1/4000s) 10000 (1/10000s), 25000 (1/25000s)

50000 (1/50000s)100000 (1/100000s)

•Partial scanning switch OFF/60fps/90fps/E.60fps/E.90fps

1Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the shutter speed by pushing [DATA UP], [DATA DOWN] buttons.

(b) Partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF/60fps/90fps/E.60fps/E.90fps by pushing [DATA UP], [DATA DOWN] buttons.

12

Image 12

Contents For Customer Use Following information is only for EU-member statesSafety Precautions Avoid setting in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Items Controlled by Using on Screen Display Available selections Preset valueNames and Functions Connector Pin Assignments ConnectionStandard Connection Operation White BalanceAutomatic White Balance Manual White Balance Outline Result displayed MeaningShutter speed mode is E.TRG mode GainShading Correction OFFMode Setting by on Screen Display Using the MenusChanging each setting in Manu mode Partial scanning settingMenus Shutter Electronic shutterChanging each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing each setting in E.TRG mode Changing each setting in 1P SNR modeChanging the polarity of inputting trigger pulse setting Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in RR mode Mode = E.TRG E.TRG = RRChanging each setting in Gain Changing the gain in Manu modeWHT BAL White balance Changing the shading correction mode Changing the manual shading correction settingChanging master pedestal Changing R pedestalAdjusting horizontal phase SyncOption Data UP, Down Menu UP, DownSetting to factory setting status External sync signal polarityShutter mode HD input VD input External SyncSetting by the frame Using the unit with external sync signalSetting by 1H Horizontal phase adjustment1P SNR 1 Pulse Trigger Sync Non Reset 1 Pulse Trigger SYNC-NON Reset Picture Output TimingEXT Trig External trigger Fval Lval DvalGer, there will be an effect on the video 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingRR Reset restart Input Timing Chart ExampleLong Term Exposure When Partial Scanning Mode is on Partial ScanningPartial Scanning OFF All pixels scanning Partial Scanning onInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCDExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division