Toshiba IK-TF7C Gain Video gain, Changing each setting in RR mode, Mode = E.TRG E.TRG = RR

Page 18

(1. 3. 5) Changing each setting in RR mode

Move up down				Set by pushing
By pushing				Set by pushing
By pushing				DATA UP, DOWN
MENU UP, DOWN				DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	RR
PART	OFF

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Partial scanning switch OFF/60fps/90fps/E.60fps/E.90fps

<MODE = E.TRG E.TRG = RR>

(a) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF/60fps/90fps/E.60fps/E.90fps by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

( 2 ) GAIN (Video gain)

GAIN has two modes; MANU, OFF.

Set the "→" to MODE, push the [DATA UP], [DATA DOWN], and select mode among MANU, OFF. In the OFF mode, gain is fixed to 0dB.

(2. 1) Changing each setting in GAIN

Move up down						Set by pushing
By pushing						Set by pushing
By pushing						DATA UP, DOWN
MENU UP, DOWN						DATA UP, DOWN
MENU UP, DOWN

		-- GAIN --
		MODE	MANU


		MANU	0dB

•Gain mode MANU, OFF

• Manual gain -3 dB to 18 dB (10 dB step)

(a) Changing the gain in MANU mode

1Set the "→" to MANU by pushing [MENU UP], [MENU DOWN] buttons.

2Set the manual gain by pushing [DATA UP], [DATA DOWN] buttons.

18

Image 18

Contents For Customer Use Following information is only for EU-member statesSafety Precautions Avoid setting in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Items Controlled by Using on Screen Display Available selections Preset valueNames and Functions Connector Pin Assignments ConnectionStandard Connection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningShading Correction Shutter speed mode is E.TRG modeGain OFFMode Setting by on Screen Display Using the MenusMenus Changing each setting in Manu modePartial scanning setting Shutter Electronic shutterChanging each setting in SS synchro. scan mode Mode = SSChanging the shutter speed setting Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging each setting in 1P SR mode Mode = E.TRG E.TRG = 1P SRChanging 1P SR exposure time setting Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in Gain Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing the gain in Manu modeWHT BAL White balance Changing master pedestal Changing the shading correction modeChanging the manual shading correction setting Changing R pedestalOption Adjusting horizontal phaseSync Data UP, Down Menu UP, DownShutter mode HD input VD input Setting to factory setting statusExternal sync signal polarity External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Horizontal phase adjustmentEXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval DvalGer, there will be an effect on the video 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingRR Reset restart Input Timing Chart ExampleLong Term Exposure Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Scanning Partial Scanning onInput Output Signal Specificatoins CCD Output Waveform Timing Chart Horizontal Output Waveform Timing ChartVertical Output Waveform Timing Chart Specifications RGB, 3CCDExternal Appearance Diagram Before Making a Service CallSymptom Items to be checked Limited One 1 Year Warranty of Labor and Parts Step-by-step Procedures How to Obtain Warranty ServiceImaging Systems Division