Toshiba IK-TF7C Changing each setting in E.TRG mode, Changing each setting in 1P SNR mode

Page 14

(1. 3) Changing each setting in E.TRG mode

The E.TRG has five modes; 1P SNR, 1P SR, PW SNR, PW SR, RR.

First set the "→" to MODE and select E. TRG, then set the "→" to E.TRG and select the desired E.TRG mode.

(1. 3. 1) Changing each setting in 1P SNR mode

Move up down						Set by pushing
By pushing						Set by pushing
By pushing						DATA UP, DOWN
MENU UP, DOWN						DATA UP, DOWN
MENU UP, DOWN

-- SHUTTER --
MODE	E.TRG
E.TRG	1P SNR
TRG.P
TRG.P
EXP.	16ms
PART	OFF

<MODE = E.TRG E.TRG = 1P SNR>

•Shutter mode MANU, SS, E.TRG

•E.TRG mode

1P SNR, 1P SR, PW SNR, PW SR, RR

•Input trigger pulse setting at 1P SNR and 1P SR

Input trigger pulse : positive polarity Input trigger pulse : negative polarity

•Exposure time setting at 1P SNR and 1P SR


0.01 ms		0.02 ms			0.4 ms			1 ms			16 ms

0.01 ms			0.02 ms			0.1 ms			1 ms
step			step			step			step

•Partial scanning switch OFF/60fps/90fps/E.60fps/E.90fps

(a) Changing the polarity of inputting trigger pulse setting

1Set the "→" to TRG.P by pushing [MENU UP], [MENU DOWN] buttons.

2Select either , by pushing [DATA UP], [DATA DOWN] buttons.

(b) Changing 1P SNR exposure time setting

1Set the "→" to EXP. by pushing [MENU UP], [MENU DOWN] buttons.

2Set the exposure time by pushing [DATA UP], [DATA DOWN] buttons.

Note:

The longer the storage time with extended exposures, the more visible certain characteristics of CCD cameras become: fixed pattern noise, white pixels, etc.

(c) Changing the partial scanning setting

1Set the "→" to PART by pushing [MENU UP], [MENU DOWN] buttons.

2Select either OFF/60fps/90fps/E.60fps/E.90fps by pushing [DATA UP], [DATA DOWN] buttons.

14

Image 14

Contents For Customer Use Following information is only for EU-member statesSafety Precautions Avoid setting in humid, smoky, vaporized or dusty places DisclaimerTable of Contents Components Items Controlled by Using on Screen Display Available selections Preset valueNames and Functions Standard Connection Connector Pin AssignmentsConnection Automatic White Balance Manual White Balance Outline OperationWhite Balance Result displayed MeaningShading Correction Shutter speed mode is E.TRG modeGain OFFMode Setting by on Screen Display Using the MenusMenus Changing each setting in Manu modePartial scanning setting Shutter Electronic shutterChanging the shutter speed setting Changing each setting in SS synchro. scan modeMode = SS Changing the polarity of inputting trigger pulse setting Changing each setting in E.TRG modeChanging each setting in 1P SNR mode Changing 1P SNR exposure time settingChanging 1P SR exposure time setting Changing each setting in 1P SR modeMode = E.TRG E.TRG = 1P SR Changing each setting in PW SNR mode Mode = E.TRG E.TRG = PW SNRChanging each setting in PW SR mode Mode = E.TRG E.TRG = PW SRChanging each setting in Gain Changing each setting in RR modeMode = E.TRG E.TRG = RR Changing the gain in Manu modeWHT BAL White balance Changing master pedestal Changing the shading correction modeChanging the manual shading correction setting Changing R pedestalOption Adjusting horizontal phaseSync Data UP, Down Menu UP, DownShutter mode HD input VD input Setting to factory setting statusExternal sync signal polarity External SyncSetting by 1H Setting by the frameUsing the unit with external sync signal Horizontal phase adjustmentEXT Trig External trigger 1P SNR 1 Pulse Trigger Sync Non Reset1 Pulse Trigger SYNC-NON Reset Picture Output Timing Fval Lval DvalGer, there will be an effect on the video 1P SR 1 Pulse Trigger Sync Reset 1 Pulse Trigger SYNC-RESET Picture Output TimingPW SNR Pulse width trigger SYNC-NON Reset Trigger*1 About 1 ∝s PW SR Pulse width trigger SYNC-RESET 1 Pulse Width Trigger SYNC-RESET Picture Output TimingLong Term Exposure RR Reset restartInput Timing Chart Example Partial Scanning OFF All pixels scanning When Partial Scanning Mode is onPartial Scanning Partial Scanning onInput Output Signal Specificatoins Vertical Output Waveform Timing Chart CCD Output Waveform Timing ChartHorizontal Output Waveform Timing Chart Specifications RGB, 3CCDSymptom Items to be checked External Appearance DiagramBefore Making a Service Call Imaging Systems Division Limited One 1 Year Warranty of Labor and PartsStep-by-step Procedures How to Obtain Warranty Service