Toshiba CSGU15BC18, CSGX36BC3, CSGS15BC23, CSGS20BC2, CSGV90BC3 instruction manual Overview, Features

Page 9

1. Overview

This GiantDragon B/W series is an integrated-(one-body)-type monochrome camera that adopts all pixel data readout inter line CCD. There are 4 models according to the sensor type. These are CSGV90BC3 (VGA), CSGX36BC3 (XGA), CSGS20BC2 (SXGA: 1/2 type), CSGU15BC18 (UXGA), and CSGS15BC23 (SXGA: 2/3 type). For video output, the Gigabit Ethernet®* interface standard “IEEE802.3ab” is adopted for high transfer rate, and it is easy to integrate into industrial equipment.

* Ethernet® is a registered trademark of XEROX Corporation.

2.Features

!High frame rate and high resolution

Supported high frame rate CSGV90BC3 (90fps/VGA), CSGX36BC3 (36fps/XGA), CSGS20BC2 (20fps/SXGA: 1/2 type), CSGU15BC18 (15fps/UXGA), and CSGS15BC23 (15fps/SXGA: 2/3 type).

!All pixel readout

All pixel signals (in the effective area) are output in one frame processing.

!Full frame shutter

Since all pixels are output even by shutter operation, high resolution can be achieved, without deteriorating the vertical resolution.

!Square grids

The CCD pixels arrayed in square grids facilitates computation for image processing.

!Gigabit Ethernet interface

Performs video output and camera control via the Gigabit Ethernet standard IEEE802.3ab interface. Data transfer is at 1Gbps that can output uncompressed video data of high frame rate.

!GigEVision Ver 1.0 conformity

This product is based on GigEVision Camera Interface Standard for Machine Vision Ver 1.0 that is industrial camera standard. Therefore, control of this camera is easy.

!GenICam Ver 1.0 conformity

This product is based on GenICam Generic Interface for Cameras Ver 1.0 that is industrial camera standard. Therefore, control of this camera is easy.

!Binning mode

This mode realizes high-speed frame rate by adding two vertical lines or four vertical lines.

1

D4153659A

Image 9
Contents CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23 Safety Precautions Definition of Safety Signs DescriptionExplanation of Safety Symbols Description General Handing Do not place anything on the equipmentUse the specified voltage Avoid giving a strong shock against the camera body When performing connection, turn off powerCases for Indemnity Limited Warranty Handle carefully MaintenanceEnvironmental operating conditions Check a combination with the lensFollowing information is only for EU-member states Others Overview FeaturesOptional part ConfigurationLED2 Explanation rear panelConnection CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23 FunctionsExposure time depends on the normal shutter speed setting Minimum unit size Expose GbE bus Timing chartTrigin Troubleshooting Specifications Electrical specificationInternal sync signal specification Output signal specification [Trigger signal specification][Electronic shutter specification] Interface specification[Operating Ambient conditions] [Machine externals specification][Typical spectral response] CSGU15BC18 CSGS15BC23 Outline Drawing D4153659A D4153659A Distributor CSGV90CC3 CSGX36CC3 CSGS20CC2 CSGU15CC18 Prohibited General Handing When performing connection, turn off power Cases for Indemnity Limited Warranty Handle carefully Following information is only for EU-member states 有毒有害物质或元素 部件名称 ( Pb) ( Hg) ( Cd) 六价铬 多溴联苯 多溴二苯醚 Color processing High-speed draft readout mode Trigin Exposeout Connection GVSPPIXBAYRG8 GVSPPIXBAYGB8 34fps 46fps Minimum unit size 160 x CSGV90CC3 CSGV90CC3 CSGX36CC3 Troubleshooting 1700 lx 2400 lx 1400 lx 1000 lx Standard subject illuminance Base clock frequency Maximum length of cable is 40m Bottom Responce Relative 400 450 500 550 600 650 700 Wave Lengthnm CSGU15CC18 Outline Drawing D4153660A D4153660A Distributor