Toshiba instruction manual Functions, CSGV90BC3 CSGX36BC3 CSGS20BC2 CSGU15BC18 CSGS15BC23

7. Functions

Control and setting of functions can be done by the camera control based on the Gigabit Ethernet digital camera protocol (GigEVision Ver.1.00).

(1)Image output

A format of the output image and frame rate which this GiantDragon B/W series supports is as follows.

Model	CSGV90BC3	CSGX36BC3	CSGS20BC2	CSGU15BC18	CSGS15BC23
Image output format		GVSP_PIX_MONO8: Mono 8 bit
		GVSP_PIX_MONO10:Mono 10 bit
Frame rate	Maximum	Maximum	Maximum	Maximum	Maximum
(at the all pixel readout)	90fps	36fps	20fps	15fps	15fps

Notes on Frame Drops of Image:

-Depends on your PC or Gigabit Ethernet interface board configurations, images may not be captured normally (e.g. frame drops may occur). In this case, change to frame rate setting lower.

(2)Setup-level setting

You can set the Setup-level in 192 steps in the range between 6.3 and 25%.

(3)Gain setting

When shipping it, the gain is set to 0dB. You can set the gain in 91 steps in the range between 0 and +12dB.

(4)Binning mode

This mode realizes high-speed frame rate by adding two vertical lines or four vertical lines.

	CSGV90BC3	CSGX36BC3	CSGS20BC2	CSGU15BC18	CSGS15BC23
Binning mode	1/2	1/2	1/2	1/4	1/2
Readout vertical line number	240	384	480	300	512
Maximum frame rate	170fps	64 fps	34fps	46fps	32fps

(5)Image resending control

As the resending control of the image, this camera resends the packet which suffered a loss.

5 D4153659A