9. Troubleshooting
If any trouble occurs in use, check the following first. If the trouble persists, contact your distributor or our sales representatives.
*When user confirms the troubles, please confirms the troubles on the condition that user connected the camera system on the smallest composition and set 1500 byte / packet to the GVSP_SIZE (SCPSx) register for making cause of trouble clear. About the connection of the smallest constitution, please refer to 6.Connection.
Phenomena | Check item |
|
|
Cannot turn on power | - Check the connection of the Camera cable. |
| - Check that the LINK LED(LED2) is lighting. |
| If the LINK LED(LED2) is not lighting, check the connection of |
| the LAN cable. |
| - Check that the Gigabit Ethernet interface board is installed and set |
| up correctly. |
|
|
Shooting image is not displayed | - Check that the LINK LED(LED2) is lighting. |
| If the LINK LED(LED2) is not lighting, check the connection of |
| the LAN cable. |
| - Check that the ACT LED(LED1) is lighting or blinking. |
| - Check that the camera register settings are correct. |
| - Check that the lens aperture is not closed. |
| - Check that the Gigabit Ethernet interface board is installed and set |
| up correctly. |
|
|
Frame drop occurs on shooting | - If some boards are installed in the PCI slots, remove the other |
image | boards. |
|
|
Shooting image remains still | - Check that the camera is not in the random trigger mode. |
| - Check that the ACT LED(LED1) is lighting or blinking. |
|
|
Cannot control camera from PC | - Check that the LINK LED(LED2) is lighting. |
| If the LINK LED(LED2) is not lighting, check the connection of |
| the LAN cable. |
| - Check that the Gigabit Ethernet interface board is installed and set |
| up correctly. |
|
|
10 | D4153660A |