Toshiba CSGX36BC3, CSGS15BC23 ［Trigger signal specification］, Output signal specification

［Trigger signal specification］

(1)External trigger input

-Input level

-Polarity

-Pulse width

-Input impedance

(2)Software trigger

[Output signal specification]

(1)BUSY_OUT

-Output level

-Polarity

(2)EXPOSE_OUT

-Output level

-Polarity

［Electronic shutter specification］

(1)Normal shutter

-PRESET setting

-Absolute value setting

(2)Random trigger shutter

-Fixed mode

-Pulse width mode

[Interface specification]

(1)Interface system

(2)Transmission speed

(3)Video output

(4)Protocol

(5)Conformity Cable

(6)Cable length

(7)Recommended cable

Low level: 0 to 0.5V

High level: 2.0 to 5.0V Positive / Negative bipolar 2us (Minimum)

High impedance

Set via the Gigabit Ethernet interface

The period that input of the trigger signal is forbidden.

LVTTL

Positive

The period that this camera exposes.

LVTTL

Positive

1/100s, 1/250s, 1/500s, 1/1000s, 1/2000, 1/4000, 1/10000, 1/20000s

any value is set up in 32-bit floating point form within the range of 1/20000s to 2s.

The exposure time depends on the normal shutter speed setting. The exposure time depends on the pulse width.

Gigabit Ethernet IEEE802.3ab (1000BASE-T) conformity 1Gbps (Maximum)

depends on 7.Functions (1) Format of output image GigEVision Camera Interface Standard for Machine Vision Ver. 1.0 conformity

Twist pair (Category 5e or over)

To 100m (at the Unshielded Twist Pair (UTP) cable using) Oki Electric Cable Co., Ltd

HONDA TSUSHIN KOGYO CO., LTD

High bending resistance shielded Cat5e LAN cable

*Because above recommendation cable is high bending resistance, maximum length of cable is 40m.

*Contact your dealer / distributor for details

of recommended cable.

12 D4153659A