White balance
Using the Custom White Balance
White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance set- ting for a given shooting environment by setting up the custom white balance.
1. Select the CUSTOM ( Å) menu of the White Balance and place a sheet of white paper in front of the camera so that the LCD monitor shows only white.
2. MENU/OK button : selects previous | White |
| paper | |
| ||||
| custom white balance. |
|
|
|
Shutter button | : saves new custom white balance. | |||
-The custom white balance value will be applied, starting with the next picture you take.
-The user configured white balance will be remain effective until it is overwritten.
Exposure compensation
This camera automatically adjusts the exposure according to the ambi- ent lighting conditions.
You can also select the exposure value by using the Fn button.
Compensating Exposure |
|
|
|
|
|
| |
1. | Press the Fn button, and then use the UP |
|
|
|
|
|
|
|
|
|
|
|
| ||
| and DOWN buttons to select the exposure |
|
|
|
|
|
|
| compensation icon ( Â). |
|
|
|
|
|
|
2. | Use the LEFT and RIGHT buttons to set the |
|
|
|
|
|
|
| desired exposure compensation factor. |
|
|
|
|
|
|
|
|
| EV | ||||
|
|
|
|
|
| ||
|
|
|
|
|
| ||
3. | Press the OK or Fn button. |
|
|
|
|
|
|
|
|
|
|
|
| ||
| The value you set will be saved and the |
|
|
|
|
|
|
|
|
|
|
|
|
| |
| Exposure Compensation setup mode will be closed. If you change | ||||||
| the exposure value, the exposure indicator ( Â) will be displayed | ||||||
| on the bottom of the LCD monitor. |
|
|
|
|
|
|
ÄA negative exposure compensation value reduces the exposure. Note that a positive exposure compensation value increases the exposure and the LCD monitor will appear white or you may not get good pictures.
02 RECORDING
RECORDING_ 
37