Nikon SB-22 instruction manual ~----------------~9

Programmed TTL Auto Flash Shooting (with Nikon F-501/N2020, F-401/N4004 or F-301/N2000)

Steps 7 through 9 provide instructions for programmed TTL auto flash shooting with the Nikon F-501 /N2020*, F-401lN4004** or F-301/N2000* camera.

For other flash exposure operations (TTL auto, non-TTL auto and manual flash exposure operations) see "SET- TING CAMERA SHUTTER SPEED " on page 16 and

"DETERMINING APERTURE," pages 17 to 32.

*The Nikon N2020 and N2000 are sold exclusively in the U.S.A. and Canadian markets.

**The Nikon N4004 is sold exclusively in the U.S.A. market.

	~----------------For programmed TTL automatic flash opera- ,"
	tion, note the following :
"	• Use AI -S type lenses only. With Nikon F-401 1 I
,

IN4004, use only AF-Nikkor lenses, except ,

, AF-Nikkor 80mm f/2.8, 200mm f/3.5 IF-ED ,

, and Autofocus Converter TC-16 /TC-16A. ,

,• For autofocus operation, set the Nikon I

,	F-501/ N2020'sfocus mode selector to S for	I
	Single Servo Autofocus mode, or set the	I
,	Nikon F-401 /N4004 to A for autofocus mode.
I	For details, see pages 13 to 15.	I

7. Set the 58-22'sflash mode selector to TTL.

For the flash shooting range in programmed TTL auto- matic operation, see the table on page 20.

The patterned bar in the middle of the flash shooting distance range indicators also shows the flash shoot- ing range in programmed TTL automatic operation.

To read the programmed aperture, set the film speed knob. The figure at the left of the patterned bar is the programmed aperture.

\I

~----------------~9