Attaching Flash Housing to ARM

You can either use the Fantasea Flex or Ball and Joint Arms to attach the flash housing to the camera housing.

Other arm systems can be used and Fantasea offers adapters to make this possible. Please check with Fantasea or your dealer regarding compatibility issues.

Insert the flat rounded end of the arm into the housing clamp and align so the threaded stainless steel pin can be inserted.

The pin goes through the non-threaded section of the clamp first and exits through the threaded section and is secured. There is no need for the use of force. See photo below.

The other end of the arm attaches to the housing tray or atop the contoured handles of the Fantasea FE-330 camera housing.