Sanyo LNS-W03 manual Be Sure to Check for Safety, List of Contents

Page 2

NOTES ON LENS INSTALLATION

The ZOOM, FOCUS and LENS SHIFT adjustment on the Top Control or the Remote Control cannot be operated with this Lens.

Lens installation and replacement should be made by the qualified service per- sonnel.

Be sure to install the lens following this procedure precisely.

The lens cover is on the lens for protection. Be sure to replace the lens cover before installation.

When installing or replacing the lens, be careful not to stain, scratch or damage the lens.

LIST OF CONTENTS

Following parts are included in the packing.

LENS

1 pc.

DRIVER

1 pc.

LIGHT-BLOCK SHEET

2 pcs.

Type FE1 (Part No. 610 280 2634) For use the Type (1) Cabinet

Type FB1 (Part No. 610 285 8211) For use the Type (2) Cabinet

BE SURE TO CHECK FOR SAFETY

After installing or replacing the lens, be sure to check the following for safety.

1.Check the lens is securely fixed by 4 screws.

2.Check no part is missing, or no mounting part is loose.

Some parts are not used for installation or replacement. Keep these parts for later use. Note : Figures in this manual may be differ from the actual product.

-1-

Image 2
Contents Type of the Cabinet and Installation Procedures Type of the Cabinet 1 See Type of the Cabinet 2 SeeBe Sure to Check for Safety List of ContentsFig-2 Lens Replacement and Installation Procedure Type 1 CabinetFig-1 Fig-3Fig-4 Fig-5Lens Replacement and Installation Procedure Type 2 Cabinet Fig-6 Focus Adjustment Fig-7