Sanyo LNS-W03 manual Lens Replacement and Installation Procedure Type 2 Cabinet

LENS REPLACEMENT AND INSTALLATION PROCEDURE (Type 2 Cabinet)

Perform the steps

1

to

7

for lens replacement and installation.

First set the lens at the center position with lens shift adjustment.

1

REMOVE THE UPPER LENS COVER. (See figure-1) A

1.Remove screws A (2 screws).

2.Push part B and pull Upper Lens Cover up.

UPPER LENS

COVER

B

2

Fig-1

REMOVE THE LOWER LENS COVER. (See figure-2)

C

1.Remove screws C (4 screws).

2.Pull Lower Lens Cover toward front and remove.

3

LOWER LENS
COVER	C

REMOVE THE COVER PLATE. (See figure-3)

Fig-2

1. Remove screws D (2 screws) and Cover	D
Plate on the back of Upper Lens Cover.

(At the step 6 , insert the light-block sheet in the same position as the removed cover plate has been placed. Two screws are not used.)

COVER PLATE

UPPER LENS

COVER

Fig-3

-4-