ATI Technologies ATP 8500 Power, Volume and UP and Down, Channel and UP and Down, Select/Play

Page 16

Remote Control Handset Operations

The remote control is preprogrammed to operate the ATP 8500 Digital Preamplifier-Processor in the AVC mode. It also has 7 other Device modes (accessed via the top two rows of buttons) including CD (CD player), DVD (DVD Player), AUX (auxillary), SAT (satellite), TV (television), VCR (videocassette recorder) and CBL (cable box) for learning functions from remote controls of other equipment from other manufacturers. A red backlight appears under the Device buttons when functions for that device are selected on the remote. The red light under the Device button is also used during programming and setting up the remote control. For instructions on learning new commands, turn to page 19.

POWER

NOTE: The top left pushbutton on the remote labeled “AVC” must be selected before using the remote to operate the ATP 8500.

This key operates the same way as the STANDBY button on the front panel. It sends the command to switch the ATP 8500 into or out of standby mode.

VOLUME ▲ AND ▼ (UP AND DOWN)

When you press the ▲ key, you will increase volume setting, and when you press the ▼ key, you will decrease volume setting. These keys work exactly the same way as the rotating volume control on the front panel. If the ATP 8500 is in the mute mode (after you have pressed the MUTE key on the handset), and you then press the VOLUME ▲ key, the ATP 8500 will automatically disengage the mute mode and re-connect the signal to the power amplifier and the loudspeakers. This prevents an excessively high volume level from being set by mistake.

CHANNEL ▲ AND ▼ (UP AND DOWN)

When in AVC mode (the top left button on the remote), these buttons scroll up and down the input selection.

MUTE

When you press the MUTE key on the remote handset, it will engage mute mode and the ATP 8500’s line outputs will be muted. MUTE is a toggle function, so when you press the key again it will disengage the mute mode. Mute mode is also disengaged when you increase the volume setting by using the VOL ▲ key on the remote handset.

GUIDE (same as PREVIEW on the front panel)

When you press this key once, the status of the ATP 8500 will be displayed on the OSD. The status display shows selected source, audio and video signal type, audio output type and volume information. The status display disappears after ten seconds or when you press the same key again. Note: There will be no status information if you have selected “Temp.Display-Off” from the OSD setup menu.

MENU

When you press this key, the ATP 8500 goes to setup mode. Use the up/down/left/right keys to navigate the menus. The ATP 8500 escapes from setup mode when you either select EXIT from the OSD or press the MENU key again.

EXIT

This key exits the setup mode without saving the new settings. Use it if you have adjusted the setup menu by accident.

SELECT/PLAY

This is the enter key in setup mode. You can us it to access sub-menus or to activate special menu items.

Page 16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents ATI ATPDTS is a trademark of Digital Theatre Systems, Inc Table of Contents Introduction Functional DescriptionSoftware Version UnpackingSafety Instructions Rack MountingConnections Quick Set-Up GuideTelevision Digital Audio Input AssignmentComponent Video Rear Panel Connections Power ConnectionsAudio Connections Record Outputs 1 Tape INPUT/OUTPUTZone Audio Output Video Connections Digital Audio Connections Other ConnectionsFront Panel Controls Power Standby Switch on Front PanelPreview ON/OFF Volume Control Source Select and UP and DownDisplay ExitHeadphone Volume DOWN/UP and Headphone Input Source Select ButtonsInput Search Audio MonitorPage Power Volume and UP and DownChannel and UP and Down Guide same as Preview on the front panelDirect Access Keys UP, DOWN, LEFT, Right KeysTape Monitor Bass Bass MIXMODE+ and Mode NoiseSW+ and SW CTR+ and CTRLearning a New Command To Erase a Learned Command From a ButtonTo Erase All the Learned Commands in One Device Mode To Erase All the Learned Commands in All Device ModesVolume Punch Through CD, DVD, AUX, SAT, TV,VCR and CBL device modesSetting UP Programming the Macro ButtonsTo Erase a Macro Sequence AN Example of Programming a Macro SequenceOn Screen Display Front Panel Display Setup Menus Accessing The Setup MenusMain Menu AN Example of the Main MenuLevel Setup Menu Tone Controls MenuDelay Setup Menu SpeakerSpeaker Setup Menu Bass MixSource Original Source New Source Remote Control Number Source Setup MenuTable for Recording NEW Source Names Display Setup Menu Trigger Setup MenuFrequently Asked Questions Customer SupportHow do I set up Zone 2? How do I hook up a DVD player?How do I change the title of a source? Does the Status display always have to be visible?Trouble Shooting Guide ATP 8500 Specifications Stereo Analog InputsGeneral Maintenance And Service Limited SEVEN-YEAR Warranty Obligation To Make ChangesPage Date of Purchase Model Number Serial Number Where Purchased Save For Your ReferenceAmplifier Technologies, Inc ATI 19528 Ventura Boulevard #318

ATP 8500 specifications

The ATI Technologies ATP 8500 is a significant graphics card that made its mark in the early 2000s, particularly among gamers and graphic designers looking for advanced performance at an affordable price point. Released as part of ATI's Radeon series, the ATP 8500 was lauded for its innovative technologies that set it apart from its competitors.

One of the primary features of the ATP 8500 is its support for DirectX 8, allowing it to render stunning graphics with realistic textures and effects. This capability was especially important during the early days of 3D gaming, where the demand for improved visuals was rising. The card utilized a 0.15-micron manufacturing process, which enabled better power efficiency and performance compared to its predecessors.

The ATP 8500 comes with 64MB or 128MB of DDR memory, offering respectable memory bandwidth speeds that were well-suited for most games at the time. This memory design facilitated quicker data access and improved overall rendering speeds, which enhanced the gaming experience without causing significant frame rate drops.

Another notable feature of the ATP 8500 is its implementation of the HyperZ technology. This was a revolutionary technology that improved memory bandwidth efficiency through techniques like occlusion culling and fast Z-buffering. As a result, the graphics card was capable of efficiently rendering complex scenes without overloading its memory resources, which was crucial for maintaining performance in graphically intense situations.

The card also introduced Adaptive Anti-Aliasing, which helped to smooth out jagged edges in graphics, creating a more visually appealing experience. This feature made it easier for gamers to immerse themselves in their virtual worlds, as the overall graphical fidelity was significantly enhanced.

In addition to its gaming capabilities, the ATI Technologies ATP 8500 also catered to multimedia applications. It supported video playback and included features for high-quality rendering of movies and animation, further broadening its appeal beyond just the gaming community.

In conclusion, the ATI Technologies ATP 8500 was a remarkable graphics card that combined cutting-edge technology with impressive performance characteristics. Its support for advanced graphics rendering, efficient memory handling, and multimedia capabilities made it a popular choice for users looking for a balance of performance and value during its time. The legacy of the ATP 8500 paved the way for future innovations in graphics technology, and it remains a memorable part of ATI's history in the competitive graphics card market.
Top Page Image Contents