ATI Technologies ATP 8500 manual Trouble Shooting Guide

Page 30

Trouble Shooting Guide

CAUTION: If you detect a fault, switch the preamplifier OFF immediately before you check the device or change cables or connections.

The remote control doesn’t work.

•Check batteries

•Make certain the rear panel power switch on the ATP 8500 is turned on.

•You must push the “AVC” button on the top row of the remote. This sets the remote to address the ATP 8500. The other buttons on the top row are for controlling your other equipment (DVD player, CD players, etc.). Then press the “power” button on the remote.

There is no sound.

•The power cord is disconnected or you have turned the power OFF. Check whether the LED in the STANDBY button is illuminated.

•You have selected an input with no source connected. Press the “Input Search” button on the front panel to automatically search for input signals.

•You have selected an input that has no signal (e.g. tuner is not on, or there is no disc in the CD player or the tape recorder has no tape running).

•The fuse is blown.

•The Tape Monitor function is ON.

•No 5.1 surround audio (video works, however) because you don’t have the digital audio output from the DVD player connected to one of the digital audio inputs (you probably just have the analog audio connected).

The sound is missing in one or more channels.

•There is a defective interconnect cable or cables.

•If you’re using the XLR balanced inputs and/or outputs, make certain pin 2 is wired “hot.” Some products built in Asia (and even some built in the USA) use pin 3 as “hot.” Also, if you’re using #2 wire adapters to the 3 wire XLR, make certain pin 2 is wired correctly and pins 1 & 3 are tied together.

•The interconnect cable is making poor contact or not connected at all. Check and if necessary unplug and replug the cable or cables.

•You might be listening to stereo, not surround sound.

I am hearing a buzz or hum.

•The interconnect cable is defective.

•The interconnect cable is partially out of its socket.

There is hum during tape playback.

•The tape deck is too close to the power amplifier.

•Plugs are making poor contact with sockets.

Some functions are not working.

•The control processor is latched. Switch POWER off (rear panel power switch) and wait for about a minute. Switch POWER on. The ATP 8500 should now operate normally.

Page 30

Page 29 Page 31
Image 30
Page 29 Page 31
Contents ATI ATPDTS is a trademark of Digital Theatre Systems, Inc Table of Contents Software Version IntroductionFunctional Description UnpackingSafety Instructions Rack MountingQuick Set-Up Guide ConnectionsTelevision Input Assignment Digital AudioComponent Video Power Connections Rear Panel ConnectionsAudio Connections Tape INPUT/OUTPUT Record Outputs 1Zone Audio Output Video Connections Digital Audio Connections Other ConnectionsPower Standby Switch on Front Panel Front Panel ControlsPreview ON/OFF Display Volume ControlSource Select and UP and Down ExitInput Search Headphone Volume DOWN/UP and Headphone InputSource Select Buttons Audio MonitorPage Channel and UP and Down PowerVolume and UP and Down Guide same as Preview on the front panelTape Monitor Direct Access KeysUP, DOWN, LEFT, Right Keys Bass Bass MIXSW+ and SW MODE+ and ModeNoise CTR+ and CTRLearning a New Command To Erase a Learned Command From a ButtonVolume Punch Through To Erase All the Learned Commands in One Device ModeTo Erase All the Learned Commands in All Device Modes CD, DVD, AUX, SAT, TV,VCR and CBL device modesTo Erase a Macro Sequence Setting UPProgramming the Macro Buttons AN Example of Programming a Macro SequenceMain Menu On Screen Display Front Panel Display Setup MenusAccessing The Setup Menus AN Example of the Main MenuLevel Setup Menu Tone Controls MenuDelay Setup Menu SpeakerSpeaker Setup Menu Bass MixSource Setup Menu Source Original Source New Source Remote Control NumberTable for Recording NEW Source Names Display Setup Menu Trigger Setup MenuFrequently Asked Questions Customer SupportHow do I change the title of a source? How do I set up Zone 2?How do I hook up a DVD player? Does the Status display always have to be visible?Trouble Shooting Guide ATP 8500 Specifications Stereo Analog InputsGeneral Maintenance And Service Limited SEVEN-YEAR Warranty Obligation To Make ChangesPage Date of Purchase Model Number Serial Number Where Purchased Save For Your ReferenceAmplifier Technologies, Inc ATI 19528 Ventura Boulevard #318

ATP 8500 specifications

The ATI Technologies ATP 8500 is a significant graphics card that made its mark in the early 2000s, particularly among gamers and graphic designers looking for advanced performance at an affordable price point. Released as part of ATI's Radeon series, the ATP 8500 was lauded for its innovative technologies that set it apart from its competitors.

One of the primary features of the ATP 8500 is its support for DirectX 8, allowing it to render stunning graphics with realistic textures and effects. This capability was especially important during the early days of 3D gaming, where the demand for improved visuals was rising. The card utilized a 0.15-micron manufacturing process, which enabled better power efficiency and performance compared to its predecessors.

The ATP 8500 comes with 64MB or 128MB of DDR memory, offering respectable memory bandwidth speeds that were well-suited for most games at the time. This memory design facilitated quicker data access and improved overall rendering speeds, which enhanced the gaming experience without causing significant frame rate drops.

Another notable feature of the ATP 8500 is its implementation of the HyperZ technology. This was a revolutionary technology that improved memory bandwidth efficiency through techniques like occlusion culling and fast Z-buffering. As a result, the graphics card was capable of efficiently rendering complex scenes without overloading its memory resources, which was crucial for maintaining performance in graphically intense situations.

The card also introduced Adaptive Anti-Aliasing, which helped to smooth out jagged edges in graphics, creating a more visually appealing experience. This feature made it easier for gamers to immerse themselves in their virtual worlds, as the overall graphical fidelity was significantly enhanced.

In addition to its gaming capabilities, the ATI Technologies ATP 8500 also catered to multimedia applications. It supported video playback and included features for high-quality rendering of movies and animation, further broadening its appeal beyond just the gaming community.

In conclusion, the ATI Technologies ATP 8500 was a remarkable graphics card that combined cutting-edge technology with impressive performance characteristics. Its support for advanced graphics rendering, efficient memory handling, and multimedia capabilities made it a popular choice for users looking for a balance of performance and value during its time. The legacy of the ATP 8500 paved the way for future innovations in graphics technology, and it remains a memorable part of ATI's history in the competitive graphics card market.
Top Page Image Contents