ATI Technologies ATP 8500 manual Safety Instructions, Rack Mounting

Page 5

Safety Instructions

NOTE FOR INSTALLATION: The ATP 8500 generates a certain amount of heat and requires ventilation. Do not place it on a soft surface such as a rug into which it could sink. You should also avoid a built-in installation place such as a bookcase or a rack unless you can provide proper ventilation for ATP 8500. Do not use this unit near water: for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool. The unit should be situated away from heat sources such as radiators, heat registers, stoves, or other devices (including power amplifiers) that produce heat.

WARNING: MOISTURE IS DANGEROUS FOR THIS DEVICE AND FORMS A HAZARD OF FIRE OR ELECTRIC SHOCK. IF LIQUID IS ACCIDENTALLY SPILLED ON IT, IMMEDIATELY SHUT OFF ITS POWER AT THE WALL OUTLET BY UNPLUGGING THE AC POWER CORD. ALLOW SUFFICIENT TIME FOR COMPLETE EVAPORATION BEFORE USING THE PREAMPLIFIER AGAIN. IF THE LIQUID IS ANY OTHER THAN WATER AND/OR ALCOHOL, DO NOT USE THE DEVICE BEFORE A QUALIFIED SERVICE TECHNICIAN HAS EXAMINED IT.

DANGER: Do not open the cover, or try to modify or repair the preamplifier yourself. All servicing must be done by a qualified technician.

IMPORTANT: USE A DAMP CLOTH TO CLEAN THE MONITOR. NEVER USE ABRASIVES OR SOLVENTS ON THE MONITOR. NEVER SPRAY LIQUIDS DIRECTLY ON THE MONITOR.

Read all the safety and operating instructions before connecting or using this unit. All warnings on the unit and in this operating manual should be adhered to. All operating and use instructions should be followed.

The unit should be connected to a power-supply outlet only of the voltage and frequency marked on its rear panel. The power-supply cord should be routed so that it is not likely to be walked on or pinched, especially near the plug, convenience receptacles, or where the cord exits from the unit. The power-supply cord of the unit should be unplugged from the wall outlet when it is to be unused for a long period of time. To prevent electric shock, do not use the polarized plug with an extension cord, receptacle or other outlet unless the blades can be fully inserted to prevent blade exposure.

The unit should be serviced by qualified service personnel when: A. The power cord or the plug has been damaged; or

B. Objects have fallen, or liquid has been spilled, into the unit; or C. The unit has been exposed to rain, or liquids of any kind; or

D. The unit does not appear to operate normally, or exhibits a marked change in performance; or E. The device has been dropped, or the enclosure damaged.

Rack Mounting

Your preamplifier-processor may be mounted in a standard 19-inch rack by using the optional Rack Mount Panel.

CAUTION: THE RACK MOUNT PANEL CANNOT SUPPORT THE WEIGHT OF YOUR PREAMPLIFIER- PROCESSOR. BE SURE TO MOUNT THE UNIT ON A STRONG, WELL-SUPPORTED SHELF.

Page 5

Page 4 Page 6
Image 5
Page 4 Page 6
Contents ATP ATIDTS is a trademark of Digital Theatre Systems, Inc Table of Contents Functional Description IntroductionSoftware Version UnpackingRack Mounting Safety InstructionsTelevision Quick Set-Up GuideConnections Component Video Input AssignmentDigital Audio Audio Connections Power ConnectionsRear Panel Connections Zone Audio Output Tape INPUT/OUTPUTRecord Outputs 1 Video Connections Other Connections Digital Audio ConnectionsPreview ON/OFF Power Standby Switch on Front PanelFront Panel Controls Source Select and UP and Down Volume ControlDisplay ExitSource Select Buttons Headphone Volume DOWN/UP and Headphone InputInput Search Audio MonitorPage Volume and UP and Down PowerChannel and UP and Down Guide same as Preview on the front panelUP, DOWN, LEFT, Right Keys Direct Access KeysTape Monitor Bass Bass MIXNoise MODE+ and ModeSW+ and SW CTR+ and CTRTo Erase a Learned Command From a Button Learning a New CommandTo Erase All the Learned Commands in All Device Modes To Erase All the Learned Commands in One Device ModeVolume Punch Through CD, DVD, AUX, SAT, TV,VCR and CBL device modesProgramming the Macro Buttons Setting UPTo Erase a Macro Sequence AN Example of Programming a Macro SequenceAccessing The Setup Menus On Screen Display Front Panel Display Setup MenusMain Menu AN Example of the Main MenuTone Controls Menu Level Setup MenuSpeaker Delay Setup MenuBass Mix Speaker Setup MenuTable for Recording NEW Source Names Source Setup MenuSource Original Source New Source Remote Control Number Trigger Setup Menu Display Setup MenuCustomer Support Frequently Asked QuestionsHow do I hook up a DVD player? How do I set up Zone 2?How do I change the title of a source? Does the Status display always have to be visible?Trouble Shooting Guide Stereo Analog Inputs ATP 8500 SpecificationsGeneral Maintenance And Service Obligation To Make Changes Limited SEVEN-YEAR WarrantyPage Save For Your Reference Date of Purchase Model Number Serial Number Where PurchasedAmplifier Technologies, Inc ATI 19528 Ventura Boulevard #318

ATP 8500 specifications

The ATI Technologies ATP 8500 is a significant graphics card that made its mark in the early 2000s, particularly among gamers and graphic designers looking for advanced performance at an affordable price point. Released as part of ATI's Radeon series, the ATP 8500 was lauded for its innovative technologies that set it apart from its competitors.

One of the primary features of the ATP 8500 is its support for DirectX 8, allowing it to render stunning graphics with realistic textures and effects. This capability was especially important during the early days of 3D gaming, where the demand for improved visuals was rising. The card utilized a 0.15-micron manufacturing process, which enabled better power efficiency and performance compared to its predecessors.

The ATP 8500 comes with 64MB or 128MB of DDR memory, offering respectable memory bandwidth speeds that were well-suited for most games at the time. This memory design facilitated quicker data access and improved overall rendering speeds, which enhanced the gaming experience without causing significant frame rate drops.

Another notable feature of the ATP 8500 is its implementation of the HyperZ technology. This was a revolutionary technology that improved memory bandwidth efficiency through techniques like occlusion culling and fast Z-buffering. As a result, the graphics card was capable of efficiently rendering complex scenes without overloading its memory resources, which was crucial for maintaining performance in graphically intense situations.

The card also introduced Adaptive Anti-Aliasing, which helped to smooth out jagged edges in graphics, creating a more visually appealing experience. This feature made it easier for gamers to immerse themselves in their virtual worlds, as the overall graphical fidelity was significantly enhanced.

In addition to its gaming capabilities, the ATI Technologies ATP 8500 also catered to multimedia applications. It supported video playback and included features for high-quality rendering of movies and animation, further broadening its appeal beyond just the gaming community.

In conclusion, the ATI Technologies ATP 8500 was a remarkable graphics card that combined cutting-edge technology with impressive performance characteristics. Its support for advanced graphics rendering, efficient memory handling, and multimedia capabilities made it a popular choice for users looking for a balance of performance and value during its time. The legacy of the ATP 8500 paved the way for future innovations in graphics technology, and it remains a memorable part of ATI's history in the competitive graphics card market.
Top Page Image Contents