ATI Technologies ATP 8500 manual Input Assignment, Digital Audio, Component Video

Page 7
DVD PLAYER

Input Assignment

Want to get a little more sophisticated? Then add these steps to assign your VCR to a front panel input button:

1.Go to Menu, go to Source setup, select input title VCR 1.

2.Go to video, select composite video 1.

3.Go to audio, select audio 1.

4.Back out of the Menu by scrolling to EXIT (do not press the Exit button on the front panel or the remote control), and press enter.

You’ve now assigned the VCR input to front panel button VCR 1.

Digital Audio

The next step up in complexity is to connect a DVD player with digital audio output so you can get 5.1 sound:

1.Connect the composite video output of your DVD player (normally the yellow colored jack) to the composite video input #1 (top row, left side) of the ATP 8500, as you did with the VCR in at left.

2. Connect the Toslink optical output of your DVD player to the Optical Input #1 on the rear of the ATP 8500 (top row, slightly right of mid-way). If you only have an SP/DIF digital audio connection (RCA type jack), use Digital Audio input #1. Warning: some DVD players have a switch on the rear panel to select the analog or digital audio outputs; make certain this is set to digital.

Follow steps 4-10 in the first example.

Component Video

 

Want to use the component video output of your DVD player instead?

 

1. Connect the 3 component video cables from your DVD player to

ATP 8500

 

the rear of the ATP 8500 marked Component Video Input #1.

 

 

 

Make certain you follow the color coding of the cables or the labels

 

 

Pb, Pr, and Y. Sometimes these are called Cb, Cr and Y instead.

 

2.

Connect the Component Video outputs of the ATP 8500 to the TV.

 

 

Once again make certain you have the cables connected to the

 

 

correct jacks.

 

3.

On your TV, select the component video input.

 

4.

Play a DVD with a Dolby Digital or DTS soundtrack.

 

5.

Press Input Search. If the component video in is not detected, you

TELEVISION

 

may need to go to the Menu system and tell the ATP 8500 to turn

 

“on” these inputs. Go to Menu, go to Source Setup, select component video “on”. Now press Input Search again. Want to set the DVD to a front panel input? Follow the same steps as you did for the VCR assignment, except use the front panel button “DVD” and select the video source (composite/component/S-VHS) and the digital audio source.

Remember to “back out” of the Menu by scrolling to the Exit selection.

Now you’ve really got to read the manual to get any further. We suggest using an experienced installer to work with things like the trigger inputs and default settings.

Page 7

Page 6 Page 8
Image 7
Page 6 Page 8
Contents ATP ATIDTS is a trademark of Digital Theatre Systems, Inc Table of Contents Unpacking IntroductionFunctional Description Software VersionRack Mounting Safety InstructionsConnections Quick Set-Up GuideTelevision Digital Audio Input AssignmentComponent Video Rear Panel Connections Power ConnectionsAudio Connections Record Outputs 1 Tape INPUT/OUTPUTZone Audio Output Video Connections Other Connections Digital Audio ConnectionsFront Panel Controls Power Standby Switch on Front PanelPreview ON/OFF Exit Volume ControlSource Select and UP and Down DisplayAudio Monitor Headphone Volume DOWN/UP and Headphone InputSource Select Buttons Input SearchPage Guide same as Preview on the front panel PowerVolume and UP and Down Channel and UP and DownBass Bass MIX Direct Access KeysUP, DOWN, LEFT, Right Keys Tape MonitorCTR+ and CTR MODE+ and ModeNoise SW+ and SWTo Erase a Learned Command From a Button Learning a New CommandCD, DVD, AUX, SAT, TV,VCR and CBL device modes To Erase All the Learned Commands in One Device ModeTo Erase All the Learned Commands in All Device Modes Volume Punch ThroughAN Example of Programming a Macro Sequence Setting UPProgramming the Macro Buttons To Erase a Macro SequenceAN Example of the Main Menu On Screen Display Front Panel Display Setup MenusAccessing The Setup Menus Main MenuTone Controls Menu Level Setup MenuSpeaker Delay Setup MenuBass Mix Speaker Setup MenuSource Original Source New Source Remote Control Number Source Setup MenuTable for Recording NEW Source Names Trigger Setup Menu Display Setup MenuCustomer Support Frequently Asked QuestionsDoes the Status display always have to be visible? How do I set up Zone 2?How do I hook up a DVD player? How do I change the title of a source?Trouble Shooting Guide Stereo Analog Inputs ATP 8500 SpecificationsGeneral Maintenance And Service Obligation To Make Changes Limited SEVEN-YEAR WarrantyPage Save For Your Reference Date of Purchase Model Number Serial Number Where PurchasedAmplifier Technologies, Inc ATI 19528 Ventura Boulevard #318

ATP 8500 specifications

The ATI Technologies ATP 8500 is a significant graphics card that made its mark in the early 2000s, particularly among gamers and graphic designers looking for advanced performance at an affordable price point. Released as part of ATI's Radeon series, the ATP 8500 was lauded for its innovative technologies that set it apart from its competitors.

One of the primary features of the ATP 8500 is its support for DirectX 8, allowing it to render stunning graphics with realistic textures and effects. This capability was especially important during the early days of 3D gaming, where the demand for improved visuals was rising. The card utilized a 0.15-micron manufacturing process, which enabled better power efficiency and performance compared to its predecessors.

The ATP 8500 comes with 64MB or 128MB of DDR memory, offering respectable memory bandwidth speeds that were well-suited for most games at the time. This memory design facilitated quicker data access and improved overall rendering speeds, which enhanced the gaming experience without causing significant frame rate drops.

Another notable feature of the ATP 8500 is its implementation of the HyperZ technology. This was a revolutionary technology that improved memory bandwidth efficiency through techniques like occlusion culling and fast Z-buffering. As a result, the graphics card was capable of efficiently rendering complex scenes without overloading its memory resources, which was crucial for maintaining performance in graphically intense situations.

The card also introduced Adaptive Anti-Aliasing, which helped to smooth out jagged edges in graphics, creating a more visually appealing experience. This feature made it easier for gamers to immerse themselves in their virtual worlds, as the overall graphical fidelity was significantly enhanced.

In addition to its gaming capabilities, the ATI Technologies ATP 8500 also catered to multimedia applications. It supported video playback and included features for high-quality rendering of movies and animation, further broadening its appeal beyond just the gaming community.

In conclusion, the ATI Technologies ATP 8500 was a remarkable graphics card that combined cutting-edge technology with impressive performance characteristics. Its support for advanced graphics rendering, efficient memory handling, and multimedia capabilities made it a popular choice for users looking for a balance of performance and value during its time. The legacy of the ATP 8500 paved the way for future innovations in graphics technology, and it remains a memorable part of ATI's history in the competitive graphics card market.
Top Page Image Contents