ATI Technologies ATP 8500 manual Learning a New Command, To Erase a Learned Command From a Button

Page 19

Remote Control Learning Operations

The remote allows you to transfer a command from a button on your source remote control (original equipment remote control) to a button on the remote control. New commands can be taught to any button in the CD, DVD, AUX, SAT, TV,VCR and CBL device modes, except on the LIGHT button.

The remote control provides distinct visual feedback with LEDs (Light Emitting Diodes) that are located at the top left of the remote control (Status LED) and under the Device buttons. The Status LED at the top left of the remote operates in three colors (red, orange and green). The Device buttons have a red color LED behind them. These LEDs will assist you in programming in the learning section of the remote control.

Learning a New Command

Select a Device mode in which you would like to teach the new command, i.e. if you wanted to learn a new command to the PRE. CH button in the TV mode on the remote, you would select the TV Device button and then use the instruc- tions below to teach the new command to the PRE. CH button.

Step 1. Press the Device button and the SELECT button simultaneously, and hold until the orange Status LED and the Device button turn on and remain lit.

Step 2. On the remote control, press the button that is to be taught the new command. The orange Status LED will begin to flash continuously. The Device LED will turn off.

Step 3. On the source remote control (original remote control), press and hold the button for the command to be learned until the Status LED on the remote turns green. Release the button on the source remote control.

Step 4. Press the button on the source remote control, once again to verify that the new command has been learned correctly. The Status LED will flash green twice and then turn to a steady orange color indicating that the programming was successful. The Device LED will turn on

Repeat Steps 2 through 4 for any other buttons to be taught in the Device mode selected in Step 1.

Step 5. Once you have completed learning new commands to buttons in the selected Device mode you must save the programmed information. Press and hold the Device button and SELECT button simultaneously, and hold until the orange Status LED flashes twice. The Device button will turn off.

Please repeat for any other Device modes starting from Step 1.

To Erase a Learned Command From a Button

Step 1. Press the Device button and SELECT buttons simultaneously, and hold until the orange Status LED and the Device button turn on and remain lit.

(Continued on next page)

Page 19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents ATP ATIDTS is a trademark of Digital Theatre Systems, Inc Table of Contents Unpacking IntroductionFunctional Description Software VersionRack Mounting Safety InstructionsConnections Quick Set-Up GuideTelevision Digital Audio Input AssignmentComponent Video Rear Panel Connections Power ConnectionsAudio Connections Record Outputs 1 Tape INPUT/OUTPUTZone Audio Output Video Connections Other Connections Digital Audio ConnectionsFront Panel Controls Power Standby Switch on Front PanelPreview ON/OFF Exit Volume ControlSource Select and UP and Down DisplayAudio Monitor Headphone Volume DOWN/UP and Headphone InputSource Select Buttons Input SearchPage Guide same as Preview on the front panel PowerVolume and UP and Down Channel and UP and DownBass Bass MIX Direct Access KeysUP, DOWN, LEFT, Right Keys Tape MonitorCTR+ and CTR MODE+ and ModeNoise SW+ and SWTo Erase a Learned Command From a Button Learning a New CommandCD, DVD, AUX, SAT, TV,VCR and CBL device modes To Erase All the Learned Commands in One Device ModeTo Erase All the Learned Commands in All Device Modes Volume Punch ThroughAN Example of Programming a Macro Sequence Setting UPProgramming the Macro Buttons To Erase a Macro SequenceAN Example of the Main Menu On Screen Display Front Panel Display Setup MenusAccessing The Setup Menus Main MenuTone Controls Menu Level Setup MenuSpeaker Delay Setup MenuBass Mix Speaker Setup MenuSource Original Source New Source Remote Control Number Source Setup MenuTable for Recording NEW Source Names Trigger Setup Menu Display Setup MenuCustomer Support Frequently Asked QuestionsDoes the Status display always have to be visible? How do I set up Zone 2?How do I hook up a DVD player? How do I change the title of a source?Trouble Shooting Guide Stereo Analog Inputs ATP 8500 SpecificationsGeneral Maintenance And Service Obligation To Make Changes Limited SEVEN-YEAR WarrantyPage Save For Your Reference Date of Purchase Model Number Serial Number Where PurchasedAmplifier Technologies, Inc ATI 19528 Ventura Boulevard #318

ATP 8500 specifications

The ATI Technologies ATP 8500 is a significant graphics card that made its mark in the early 2000s, particularly among gamers and graphic designers looking for advanced performance at an affordable price point. Released as part of ATI's Radeon series, the ATP 8500 was lauded for its innovative technologies that set it apart from its competitors.

One of the primary features of the ATP 8500 is its support for DirectX 8, allowing it to render stunning graphics with realistic textures and effects. This capability was especially important during the early days of 3D gaming, where the demand for improved visuals was rising. The card utilized a 0.15-micron manufacturing process, which enabled better power efficiency and performance compared to its predecessors.

The ATP 8500 comes with 64MB or 128MB of DDR memory, offering respectable memory bandwidth speeds that were well-suited for most games at the time. This memory design facilitated quicker data access and improved overall rendering speeds, which enhanced the gaming experience without causing significant frame rate drops.

Another notable feature of the ATP 8500 is its implementation of the HyperZ technology. This was a revolutionary technology that improved memory bandwidth efficiency through techniques like occlusion culling and fast Z-buffering. As a result, the graphics card was capable of efficiently rendering complex scenes without overloading its memory resources, which was crucial for maintaining performance in graphically intense situations.

The card also introduced Adaptive Anti-Aliasing, which helped to smooth out jagged edges in graphics, creating a more visually appealing experience. This feature made it easier for gamers to immerse themselves in their virtual worlds, as the overall graphical fidelity was significantly enhanced.

In addition to its gaming capabilities, the ATI Technologies ATP 8500 also catered to multimedia applications. It supported video playback and included features for high-quality rendering of movies and animation, further broadening its appeal beyond just the gaming community.

In conclusion, the ATI Technologies ATP 8500 was a remarkable graphics card that combined cutting-edge technology with impressive performance characteristics. Its support for advanced graphics rendering, efficient memory handling, and multimedia capabilities made it a popular choice for users looking for a balance of performance and value during its time. The legacy of the ATP 8500 paved the way for future innovations in graphics technology, and it remains a memorable part of ATI's history in the competitive graphics card market.
Top Page Image Contents