Tyco ADC 660P instruction manual Camera As Video OUT Camera Bs Video OUT

Hi-Res. B/W camera instruction manual

ADC 660N and ADC 660P

_________________________________

1.While observing the video output signals from both cameras on an oscilloscope, turn camera A's V-phase control (on back of camera) until vertical sync from both cameras is in phase.

2.If camera A's adjustment range is insufficient, adjust camera B's V- phase control in the opposite direction to camera A until they are in phase.

3.If these adjustments do not bring vertical sync from both cameras in phase, recheck the polarity of the power supply connections.

Camera A's VIDEO OUT

Camera B's VIDEO OUT

Should be in phase

If an oscilloscope is not available, a less accurate adjustment can be made by observing the monitor and adjusting the V-phase control potentiometer until no roll occurs on the monitor when switching back and forth between cameras A and B.

12