Tyco ADC 660P Do not attempt to disassemble the camera, Never point the camera toward the sun

Page 4

PRECAUTIONS

1. Do not attempt to disassemble the camera.

In order to prevent electric shock, do not remove screws or cover. There are

no user-serviceable parts inside.

2.Do not expose the camera to rain or moisture, or try to operate it in wet areas.

Take immediate action if the camera becomes wet. Turn the power off and refer servicing to qualified service personnel. Moisture can damage the camera and also create a danger of electric shock.

3.Do not use strong or abrasive detergents when cleaning the camera body. Use a dry cloth to clean the camera when dirty. In a case where the dirt is

hard to remove, use a mild detergent and wipe gently.

4. Never point the camera toward the sun.

Whether the camera is used outdoors or not, never point it toward the sun. Use caution when operating the camera in the vicinity of spot lights or other bright lights and light reflecting objects.

5.Do not operate the camera beyond its temperature, humidity or power source ratings.

Do not use the camera in an extreme environment where high temperature or high humidity exists. Use the camera under conditions where temperatures are between 14° F~122° F (-10° C~+50° C) and humidity is below 85%.

6.Use a 24V AC / 12V DC class 2 LPS supply only.

Image 4
Contents ADC 660N ADC 660P Equipment Modification Caution Page Never point the camera toward the sun Do not attempt to disassemble the cameraUse a 24V AC / 12V DC class 2 LPS supply only ADC 660N and ADC 660P Connectors and Controls Video Output Connector BNC Video Output Connector BNC Power Input Connector screw terminalAuto Iris Lens Connector for Video Drive Lens Auto Iris Lens Connector for DC Drive LensBLC Backlight Compensation ON/OFF Switch ALC/ELC Select Switch EE/ELC is on ALC/AI is OFF AGC ON/OFF Switch INT/LL Switch LL is on INT is OFFFL on Switch Flickerless ON/OFF Phase Adjustment PotentiometerCamera As Video OUT Camera Bs Video OUT ALC Level Adjustment Potentiometer for DC Drive Lens Power Indicator LED Backfocus Adjustment ScrewADC 660N and ADC 660P CCD Dust Protective Cap Mount Adaptor RingCamera Mount Hole Camera Mount Base One monitor system with two or more cameras III. Dimensions IV. Specifications