Tyco ADC 660P Mount Adaptor Ring, CCD Dust Protective Cap, Camera Mount Hole Camera Mount Base

Page 16

Hi-Res. B/W camera instruction manual

ADC 660N and ADC 660P

_________________________________

14. C Mount Adaptor Ring

The C-mount adaptor ring is used only if a C-mount lens is used on the camera. If a CS- mount lens is used, the adaptor is not necessary. To install the adaptor, first screw it into the lens mount opening on the camera. Then screw the C-mount lens into the adaptor.

15. CCD Dust Protective Cap

Remove this cap before installing the lens.

Do not handle or leave the camera with cap open.

16.Camera Mount Hole

17.Camera Mount Base

16

Image 16
Contents ADC 660N ADC 660P Equipment Modification Caution Page Never point the camera toward the sun Do not attempt to disassemble the cameraUse a 24V AC / 12V DC class 2 LPS supply only ADC 660N and ADC 660P Connectors and Controls Video Output Connector BNC Video Output Connector BNC Power Input Connector screw terminalAuto Iris Lens Connector for Video Drive Lens Auto Iris Lens Connector for DC Drive LensBLC Backlight Compensation ON/OFF Switch ALC/ELC Select Switch EE/ELC is on ALC/AI is OFF AGC ON/OFF Switch INT/LL Switch LL is on INT is OFFFL on Switch Flickerless ON/OFF Phase Adjustment PotentiometerCamera As Video OUT Camera Bs Video OUT ALC Level Adjustment Potentiometer for DC Drive Lens Power Indicator LED Backfocus Adjustment ScrewADC 660N and ADC 660P CCD Dust Protective Cap Mount Adaptor RingCamera Mount Hole Camera Mount Base One monitor system with two or more cameras III. Dimensions IV. Specifications