Tyco ADC 660P instruction manual Auto Iris Lens Connector for Video Drive Lens

Hi-Res. B/W camera instruction manual

ADC 660N and ADC 660P

_________________________________

This terminal accepts 12 VDC or 24 VAC.

Power Requirement: Maximum 200 mA (12 VDC), Maximum 100 mA (24 VAC).

Recommended Power Supply: Minimum 500 mA (12 VDC); Minimum 300 mA (24 VAC).

Caution:

Use a 24V AC / 12V DC class 2 LPS supply only.

3. Auto Iris Lens Connector for VIDEO Drive Lens

This connector supplies 9 VDC power and video signal, without sync, for video-drive type Auto Iris lens.

PIN	Signal
1	GROUND
2	POWER SUPPLY (9 VDC, 40mA)

3VIDEO OUTPUT (0.7Vp-p without sync)

When using a VIDEO drive lens, the ALC/ELC DIP #1 must be set to the ALC (OFF)

position.

4. Auto Iris Lens Connector for DC Drive Lens

This connector supplies the control signals to the DC drive Auto Iris lens.

8