2.3 The USB function
By connecting the IP camera with a PC via the USB connector, the IP camera can provide two different functions.
1.Insert an SD card: As a card reader.
Insert an SD card into the IP camera, then connect to the PC. You might transfer files between the SD card and the PC. Once you've connected your IP camera to your computer, the Windows system will detect the connection and ask you what you want to do with your SD card.
In other words, if the user connects the IP camera with an SD card and the PC via the USB connector, the IP camera can be used as a normal card reader.
2.Remove an SD card: As a configuring tool.
Before using the USB configuration setting page, please remember to remove the SD card or your PC will read the SD card and won’t show this window.
DHCP ON
DHCP OFF
(default)
Network
Setting
NOTE: After changing the settings, please click the “Apply” button. All of the options will be effective after removing the USB connector.
NOTE: After the IP address has been changed and/ or reset, please unplug the network
cable, then plug it once again to make sure the network connection is in normal
mode.
14 | Installation and Operation Guide |