Installation and Operation Guide
5.1.8 PPPoE & DDNS
Using the PPPoE
1.Install the XDSL software (obtained from your ISP dealer) in your PC.
2.Search for your IP camera's IP address: you can connect the IP camera and the Video monitor. The monitor screen will show the IP address on its right side.
3.Change the switch on the IP camera's side panel to position # 4.
4.Installing an IP address in your PC or notebook.
Desktop → Move the cursor to the Network neighborhood and right click the mouse → Choose the properties → Choose your local connection → Choose the properties and select the configuration → Select the TCP / IP → Choose the properties → Enter the IP address in a
5.Desktop → Choose IE browser → Enter the IP camera IP address in the URL (check step # 2 above) → Enter → IP camera images will appear.
PPPoE Settings
1.Enter the IP camera home page → Choose the network → Enter “User Name: admin” and
“Password: 9999” → Click “OK’.
2.Choose PPPoE → PPPoE mode: Select “ON” → Enter “Account” → Enter “Password” → Submit → Unplug the power connection.
3.Plug in the IP camera and it will receive an IP address from the ISP dealer (this IP address is dynamic
65