Tyco 8200-2646-00 B0 manual IP camera SD card Troubleshooting

Page 19

Installation and Operation Guide

3.5 IP camera SD card Troubleshooting

1.Check if the SD card position is correct or not. Please refer to the manual for the related information.

2.Correctly insert the SD card after powering the IP camera on. The "SD" icon displays in the upper-right corner of the monitor screen. If not, it means the device detection has failed. Please contact your technical support and ignore the following steps.

3.If a check mark appears, please check the following:

a.Is it really an SD "Memory" Card?

b.Is this SD card formatted in the FAT16 format?

c.Connect the SD card with a PC and test to see whether the PC can read the data or not.

d.Does this SD card still have the capacity for storing data?

e.Is the SD card set to write?

If there is no check mark beside the "SD" icon, please go on to the next step.

If all the answers are "yes" but the check mark still persists, please contact your technical support and ignore the following steps.

4.Ensure the "SD CARD ENABLE" function is activated in the ALARM and SCHEDULE pages if there is no check mark appears beside the "SD" icon on the screen.

5.Read the data on the web page of "sdget.htm" after recording. If the data cannot be read through the network, please read it instead in a PC, check the data stored in the "LANCAM" directory

and contact your technical support regardless of whether there is data or not.

WARNING:

1.Performing this troubleshooting process may need a monitor, a PC, a card reader and some cables.

2.If the SD card is removed while storing or accessing data, the data will be lost.

3.If there is a check mark beside the "SD" icon, it means the SD card has been inserted into the IP camera but cannot perform its writing function. Possible reasons are:

a.It is not an SD memory card.

b.The SD card is unformatted or formatted in a non-FAT16 or non-FAT12 format.

c.The file system is damaged.

d.The capacity of the SD card is full.

e.The SD card is set to be read only.

4.Turn off the power before inserting the SD card. Otherwise the unit may shut down.

19

Image 19

Contents Installation & Operation Guide Page Copyright Table Of Contents Icrosoft I Nternet E Xplorer Operation Instructions for the NetworkSafety Precautions Product Instructions Product FeaturesTechnical Specifications Product FeaturesSupported ImageGeneral I/O SystemDimensions / Weight Accessories Included Front Panel and Rear Panel Description of the FRONT/REAR ViewFlank Panel DIP SwitchRS485 pin D+ Alarm wiring diagram Dhcp on Dhcp OFF USB functionBracket mount installation Installation File of the system firmware is intact Updating System SoftwareInstallation and Operation Guide IP camera SD card Troubleshooting Cable Connections PC Wiring ConfigurationConnect to a computer Connect to a LAN Hub Intranet Enable Dhcp Function Configure Your IP Camera Network SettingsSet IP Address Installation and Operation Guide TCP/IP Communication Software TCP/IP configuration setting TCP/IP InstallationSelect TCP/IP, and then click Properties Click Start → Programs → MS-DOS Prompt Connection TestingType Camera IP address RJ-45 socket Microsoft Internet Explorer Connecting the IP cameraBrowsing images from the IP camera Homepage of Mjpeg modeVideo setting page of Mjpeg mode Change Video SettingFocus Adjust function Exchange the image format 255 Fine Tune mode White BalanceFrame rate Format 4200K, Outdoor 6500K, Push HoldChange the Network Setting Http Port Default GatewayDescription of function keys IP Address NetmaskChange the Network Setting FTP Mjpeg mode only Email Address Change the Network Setting Smtp Mjpeg mode onlyDescription of function keys Account Name & Password Smtp ServerDescription of function keys Sntp Server Time Zone Submit Change the Network Setting SntpChange the Network Setting Ddns Ddns Host Name Description of function keys Enable Ddns FunctionDdns Password Ddns TypeChange the Network Setting PPPoE UPnP Port Change the Network Setting -UPnPDescription of function keys Ssdp PortChange the Network Setting IP Filter Description of function keys Maximum Upload Bandwidth Change the Network Setting -Network TrafficSet Manually Change the System SettingSet the Date and Time of the system Description of function keys Local TimeTimestamp Location Change the System Setting TimestampDescription of function keys Enable Timestamp Timestamp ColorChange the System Setting Users Change the System Setting Digital I/O Change the System Setting Audio Change the System Setting RS485 Setting Change the System Setting Update Firmware Description of function keys First Previous Next View the Event LogsAlarm Memory Buffer Change the Application SettingUpload Rates Recording Rate SD Card setting page of Mjpeg modeDescription of function keys Mjpeg Format Max Mjpeg NumbersDescription of function keys File numbers Change the Application Setting -Language Setting Record setting page of Mjpeg mode Remove All Schedules Change the Application Setting -Record ScheduleChart Description of function keys ScheduleSmtp Description of function keys Enable Alarm Trigger an AlarmAlarm Duration Predetermines the length of the alarm FTPChange the Application Setting Alarm Motion Detection Change the SD card Setting Change the Pan/Tilt setting PPPoE Settings PPPoE & Ddns Using the PPPoETest Go to the Internet Ddns settingsBandwidth Calculator of the IP camera Question Advanced OperationUse IE to view the recorded files Set the recording time the AVI duration of the SD cardModify the user Set the PPPoE functionUse the Sub Hostname to view the IP camera Add a new userSpecifications Functions of client PC Check the IP class of your PC Appendix 1. -IP camera UPnP How ToInstallation and Operation Guide Installation and Operation Guide Install UPnP Packets Installation and Operation Guide Turn on Services Installation and Operation Guide Installation and Operation Guide Installation and Operation Guide Scan LANCams through My Network Place ARP and ping from Windows or MS-DOS Setting the IP AddressARP and ping from Unix or GNU/Linux Registering for a Ddns Create an account Set up the DdnsInstallation and Operation Guide Address. It will renew the IP Address automatically Installation and Operation Guide Unit is in Mbps/second Appendix 4. -MPEG4 Bit Rate Lookup Table of IP cameraAppendix 5. -FAQ