iOptron 7201, 7200 instruction manual

Page 11

An object name, such as “Mercury” or “Andromeda Galaxy”: Name of the Star or celestial object that the mount is currently slewing to, GOTO or tracking;

2.Target R.A.: Right Ascension of the target object.

3.Target Declination: Declination of the target object.

4.Right Ascension: Right Ascension of the telescope, or R.A.

5.Declination: Declination of the telescope, or DEC.

6.Altitude: Altitude of the telescope (degrees vertical from the local horizon - zenith is 90º).

7.Azimuth: Azimuth of the telescope (north is 0º, east is 90º, south is 180º, and west is 270º).

8.Local Date and Time: display local time in a format of YY-MM-DD HH:MM:SS.

9.Mount Status: Display current operation status of the mount.

Stop: mount is not moving;

Slew: mount is moving with an arrow key pressed;

GoTo: mount is slewing to a celestial object using “Select and Slew”;

10.GPS status: When the power is turned on, it shows “GPS ON”, which means that the mount is connected to its GPS receiver. When the GPS receiver finds the satellites and receives the GPS signal, it shows “GPS OK”. The “GPS OK” may turn off after a few minutes to save power.

11.PEC status: Display of “PEC” here Indicates the PEC playback is turned on. Default is off.

12.Tracking speed: Display current tracking status of the mount

SDRL: mount is tracking at sidereal speed;

Solar: mount is tracking at solar speed;

Lunar: mount is tracking at lunar speed;

King: mount is tracking at king speed;

CSTM: mount is tracking at a customer-defined speed.

13.Slew speed: It has 9 speeds: 1X, 2X, 8X, 16X, 64X, 128X, 256X, 512X, MAX (~3.75º/sec).

14.Operation Mode: Indicate if the mount is working at the EQ mode

11

Image 11
Contents IOptron CEM60 Center-Balanced Equatorial Mount Page Table of Content Ioptron TWO Year TELESCOPE, MOUNT, and Controller Warranty CEM60 Overview FeaturesCEM60 Terms Parts List1CEM60 Mount Ports Assembly TermsCEM60 Cable Management CEM60 Gear SwitchesKey Description Go2Nova 8407 Hand ControllerSerial port pin out on an 8407 hand controller LCD ScreenPage Introduction CEM60Mount AssemblyCEM60Mount Assembly Attaching the Mount Removing the Mount from the Carrying CaseInstalling the Counterweight CW Shaft Setting the LatitudeInstalling the Counterweights Tilt the counterweight shaft for lowBalancing the Payload Connecting CablesSetting Hand Controller Set Local Time Press Enter and select Set Time & SitePerforming Polar Alignment Set Observation Site CoordinatesQuick Polar Alignment Returning Mount to Zero Position BrightStar Polar AlignmentZero position One Star Alignment Setting the Mount and Performing Polar AlignmentGetting Started Manual Operation of the MountGear system for transportation Star Identification FunctionTurning Off the Mount Putting the Mount Back into the Carrying CaseSelect and Slew Complete Functions of Go2Nova 8407Hand ControllerAlign Sync to TargetMulti-Star Align Display Axes ErrorOne Star Alignment Solar System AlignSet Display SettingsSet Time & Site Set BeepElectric Focuser Telescope Motion PEC OptionEnter Other Objects or Observation List Edit User ObjectsEnter a New Comet Goto Zero Position Firmware InformationBattery Replacement and Disposal Instructions Maintenance and ServicingMaintenance IOptron Customer ServicePEC Appendix A. Technical SpecificationsMenu Appendix B. Go2Nova 8407HC Menu StructurePage Page Appendix C. Firmware Upgrade Appendix D. Computer Control a CEM60 Mount Messier Catalog Appendix E. Go2NovaStar ListNamed Star List Modern Constellations Deep Sky Object List Double Star List SAO Atik Ioptron TWO Year TELESCOPE, MOUNT, and Controller Warranty