iOptron 7200, 7201 instruction manual Ioptron TWO Year TELESCOPE, MOUNT, and Controller Warranty

Page 46

IOPTRON TWO YEAR TELESCOPE, MOUNT, AND CONTROLLER WARRANTY

A. iOptron warrants your telescope, mount, or controller to be free from defects in materials and workmanship for two years. iOptron will repair or replace such product or part which, upon inspection by iOptron, is found to be defective in materials or workmanship. As a condition to the obligation of iOptron to repair or replace such product, the product must be returned to iOptron together with proof-of-purchase satisfactory to iOptron.

B. The Proper Return Merchant Authorization Number must be obtained from iOptron in advance of return. Call iOptron at 1.781.569.0200 to receive the RMA number to be displayed on the outside of your shipping container.

All returns must be accompanied by a written statement stating the name, address, and daytime telephone number of the owner, together with a brief description of any claimed defects. Parts or product for which replacement is made shall become the property of iOptron.

The customer shall be responsible for all costs of transportation and insurance, both to and from the factory of iOptron, and shall be required to pre-pay such costs.

iOptron shall use reasonable efforts to repair or replace any telescope, mount, or controller covered by this warranty within thirty days of receipt. In the event repair or replacement shall require more than thirty days, iOptron shall notify the customer accordingly. iOptron reserves the right to replace any product which has been discontinued from its product line with a new product of comparable value and function.

This warranty shall be void and of no force of effect in the event a covered product has been modified in design or function, or

subjected to abuse, misuse, mishandling or unauthorized repair. Further, product malfunction or deterioration due to normal wear is

not covered by this warranty.

IOPTRON DISCLAIMS ANY WARRANTIES, EXPRESS OR IMPLIED, WHETHER OF MERCHANTABILITY OF FITNESS FOR A PARTICULAR USE, EXCEPT AS EXPRESSLY SET FORTH HERE. THE SOLE OBLIGATION OF IOPTRON UNDER THIS LIMITED WARRANTY SHALL BE TO REPAIR OR REPLACE THE COVERED PRODUCT, IN ACCORDANCE WITH THE TERMS SET FORTH HERE. IOPTRON EXPRESSLY DISCLAIMS ANY LOST PROFITS, GENERAL, SPECIAL, INDIRECT OR CONSEQUENTIAL DAMAGES WHICH MAY RESULT FROM BREACH OF ANY WARRANTY, OR ARISING OUT OF THE USE OR INABILITY TO USE ANY IOPTRON PRODUCT. ANY WARRANTIES WHICH ARE IMPLIED AND WHICH CANNOT BE DISCLAIMED SHALL BE LIMITED IN DURATION TO A TERM OF TWO YEARS FROM THE DATE OF ORIGINAL RETAIL PURCHASE.

Some states do not allow the exclusion or limitation of incidental or consequential damages or limitation on how long an implied warranty lasts, so the above limitations and exclusions may not apply to you.

This warranty gives you specific legal rights, and you may also have other rights which vary from state to state.

iOptron reserves the right to modify or discontinue, without prior notice to you, any model or style telescope.

If warranty problems arise, or if you need assistance in using your telescope, mount, or controller contact:

iOptron Corporation

Customer Service Department

6E Gill Street

Woburn, MA01801 www.ioptron.com support@ioptron.com Tel. (781)569-0200 Fax. (781)935-2860

Monday-Friday 9AM-5PM EST

NOTE: This warranty is valid to U.S.A. and Canadian customers who have purchased this product from an authorized iOptron dealer in the U.S.A. or Canada or directly from iOptron. Warranty outside the U.S.A. and Canada is valid only to customers who purchased from an iOptron Distributor or Authorized iOptron Dealer in the specific country. Please contact them for any warranty.

Image 46
Contents IOptron CEM60 Center-Balanced Equatorial Mount Page Table of Content Ioptron TWO Year TELESCOPE, MOUNT, and Controller Warranty Features CEM60 OverviewParts List1 CEM60 TermsAssembly Terms CEM60 Mount PortsCEM60 Gear Switches CEM60 Cable ManagementGo2Nova 8407 Hand Controller Key DescriptionLCD Screen Serial port pin out on an 8407 hand controllerPage CEM60Mount Assembly CEM60Mount AssemblyIntroduction Removing the Mount from the Carrying Case Attaching the MountSetting the Latitude Installing the Counterweight CW ShaftTilt the counterweight shaft for low Installing the CounterweightsSetting Hand Controller Connecting CablesBalancing the Payload Press Enter and select Set Time & Site Set Local TimeSet Observation Site Coordinates Performing Polar AlignmentQuick Polar Alignment BrightStar Polar Alignment Returning Mount to Zero PositionZero position Manual Operation of the Mount Setting the Mount and Performing Polar AlignmentGetting Started One Star AlignmentPutting the Mount Back into the Carrying Case Star Identification FunctionTurning Off the Mount Gear system for transportationComplete Functions of Go2Nova 8407Hand Controller Select and SlewSync to Target AlignSolar System Align Display Axes ErrorOne Star Alignment Multi-Star AlignSet Beep SettingsSet Time & Site Set DisplayElectric Focuser PEC Option Telescope MotionEnter a New Comet Edit User ObjectsEnter Other Objects or Observation List Firmware Information Goto Zero PositionIOptron Customer Service Maintenance and ServicingMaintenance Battery Replacement and Disposal InstructionsAppendix A. Technical Specifications PECAppendix B. Go2Nova 8407HC Menu Structure MenuPage Page Appendix C. Firmware Upgrade Appendix D. Computer Control a CEM60 Mount Appendix E. Go2NovaStar List Messier CatalogNamed Star List Modern Constellations Deep Sky Object List Double Star List SAO Atik Ioptron TWO Year TELESCOPE, MOUNT, and Controller Warranty