Polaroid MAXXUM HTsi Focus Spot AF, Focus Manual Focus, AF Power Zoom and xi-Series Lenses

Page 28

FOCUS – Spot AF

Spot AF uses the center focus sensor and the current metering mode (p55) to lock focus and exposure. The focus and exposure settings remain locked until the spot AF button is released.

1.Place your subject inside the spot-focus area.

2. Press and hold the spot AF button.

• Focus is confirmed when appears in the viewfinder.

will appear in the viewfinder, indicating the center focus sensor is being used.

3.Press the shutter-release button all the way down to

take the picture.

•Focus and exposure readings are held until the spot AF button is released.

FOCUS – Manual Focus

Focus the lens manually when autofocus is not suitable and focus hold is not possible. The autofocus system will monitor focus and indicate when a subject in the focus frame is in focus.

1. Press the focus-mode button. will appear in the

data panel.

2. Turn the focusing ring until your subject appears sharp and focused.

• appears in the viewfinder when the subject in the focus frame is in focus.

• Press the focus-mode button again to return to the autofocus mode.

AF Power Zoom and xi-Series Lenses

Pull and turn the control ring until your subject appears sharp.

52

53

Image 28

Contents Page For Proper and Safe USE Table of Contents V E L I INames of Parts BodyData Panel ViewfinderQuick Operation Level Attaching the StrapChecking Battery Power Installing the BatteriesBatteries Attaching the Lens LensRemoving the Lens Extend the leader between the guide rails to the index mark Loading FilmClose the back cover Holding the Camera Handling the CameraPressing the Shutter-Release Button Taking Pictures in FULL-AUTO Focus SignalsFocus is confirmed Special Focus Situations Focus HoldUsing the BUILT-IN Flash Flash SignalsLens Shadowing Flash RangeFlash Cancel Cancelling Red-eye ReductionFill Flash Red-Eye ReductionRewinding the Film Automatic RewindManual Rewind Wait until the film is completely rewoundPortrait Mode Landscape ModeSubject Program Selection TipsClose-Up Mode Sports ModeNight Portrait Mode Photographing Night ScenesTurn the control dial until Appears in the data panelSELF-TIMER Continuous Advance ModeMode Aperture Priority Mode Flash Cancelling the FlashAperture Control Press the flash-mode button to pop-up the built-in flashMode Shutter Priority Push the built-in flash down or turn the accessory flash offShutter Control Mode ManualFast Shutter Speed Slow Shutter Speed Metering in Manual Mode Firmly press the eyepiece cap into the eyepiece Taking Time Exposures buLbPress and hold the shutter- release button to take Picture D I T I O N a L A T U R E S Focus Wide Focus AreaFocus Spot AF AF Power Zoom and xi-Series LensesFocus Manual Focus Focus AF Illuminator Exposure 14 Segment MeteringExposure Spot Metering Exposure Exposure CompensationExposure Setting the ISO Manually Exposure BracketingCancelling Bracketing Select the desired drive modeFlash Notes Bracketing with Exposure Compensation ButtonCancelling Multiple Exposure Exposure Multiple ExposureAttach the 5400HS flash and set it to standard mode Flash High-Speed SyncMetering Multiple Exposures Compensate the exposures as followsPress the Mode button to choose the data imprinting format Flash Slow SyncExposing the Date/Time Slow-shutter SyncSetting the Date/Time Replacing the BatteryReplace the battery cover, then reset the date and time For Owners of the Quartz Date ModelSetting the Custom Functions Custom FunctionsCust 1 AF Release Priority Cust 2 Film Rewind StartCust 4 DX Memory Cust 5 Flash Control in P ModeCust 6 Focus-hold button Lens Cust 8 Spot/AE Lock button Cust 7 Spot AF buttonCust 9 AF Illuminator built-in flash Program Reset Button P E N D ICompatibility of Accessories Accessory InformationAccessory Flash Control Lens Specifications Exposure WarningsFor owners of the optional lens kits Lens HoodTrouble Shooting ProblemCare and Storage Operating Temp and ConditionsSpecifications Page 13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan