Polaroid MAXXUM HTsi instruction manual Attaching the Lens, Removing the Lens

Page 9

LENS

Attaching the Lens

1. Remove the body and rear lens caps.

2. Align the red mounting dots on the lens and camera body.

3. Gently insert the lens into the mount, then turn it clockwise until it clicks into the locked position.

• Do not insert the lens at an angle.

• Do not press the lens release when attaching the lens.

LENS

Removing the Lens

1. Press the lens release and turn the lens counter- clockwise until it stops.

2.Gently remove the lens and replace caps, or attach another lens.

Caution

•Do not force the lens if it does not turn smoothly.

•Do not touch the inside of the camera, especially the lens contacts and mirror.

Image 9

Contents Page For Proper and Safe USE V E L I I Table of ContentsBody Names of PartsViewfinder Data PanelQuick Operation Attaching the Strap LevelInstalling the Batteries Checking Battery PowerBatteries Lens Attaching the LensRemoving the Lens Loading Film Extend the leader between the guide rails to the index markClose the back cover Handling the Camera Holding the CameraPressing the Shutter-Release Button Focus Signals Taking Pictures in FULL-AUTOFocus is confirmed Focus Hold Special Focus SituationsFlash Signals Using the BUILT-IN FlashLens Shadowing Flash RangeCancelling Red-eye Reduction Flash CancelFill Flash Red-Eye ReductionAutomatic Rewind Rewinding the FilmManual Rewind Wait until the film is completely rewoundLandscape Mode Portrait ModeSubject Program Selection TipsSports Mode Close-Up ModePhotographing Night Scenes Night Portrait ModeTurn the control dial until Appears in the data panelContinuous Advance Mode SELF-TIMERMode Aperture Priority Cancelling the Flash Mode FlashAperture Control Press the flash-mode button to pop-up the built-in flashPush the built-in flash down or turn the accessory flash off Mode Shutter PriorityMode Manual Shutter ControlFast Shutter Speed Slow Shutter Speed Metering in Manual Mode Taking Time Exposures buLb Firmly press the eyepiece cap into the eyepiecePress and hold the shutter- release button to take Picture Focus Wide Focus Area D I T I O N a L A T U R E SAF Power Zoom and xi-Series Lenses Focus Spot AFFocus Manual Focus Exposure 14 Segment Metering Focus AF IlluminatorExposure Exposure Compensation Exposure Spot MeteringExposure Bracketing Exposure Setting the ISO ManuallySelect the desired drive mode Cancelling BracketingFlash Notes Bracketing with Exposure Compensation ButtonExposure Multiple Exposure Cancelling Multiple ExposureFlash High-Speed Sync Attach the 5400HS flash and set it to standard modeMetering Multiple Exposures Compensate the exposures as followsFlash Slow Sync Press the Mode button to choose the data imprinting formatExposing the Date/Time Slow-shutter SyncReplacing the Battery Setting the Date/TimeReplace the battery cover, then reset the date and time For Owners of the Quartz Date ModelCustom Functions Setting the Custom FunctionsCust 1 AF Release Priority Cust 2 Film Rewind StartCust 5 Flash Control in P Mode Cust 4 DX MemoryCust 6 Focus-hold button Lens Cust 7 Spot AF button Cust 8 Spot/AE Lock buttonCust 9 AF Illuminator built-in flash P E N D I Program Reset ButtonAccessory Information Compatibility of AccessoriesAccessory Flash Control Exposure Warnings Lens SpecificationsFor owners of the optional lens kits Lens HoodProblem Trouble ShootingOperating Temp and Conditions Care and StorageSpecifications Page 13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan