Polaroid MAXXUM HTsi instruction manual For Owners of the Quartz Date Model, Setting the Date/Time

Page 36

FOR OWNERS OF THE QUARTZ DATE MODEL

Setting the Date/Time

1. Press the MODE button to choose the data imprinting format.

• M will appear above the month.

2. Use the SELECT button to move

between different parts of the displayed data.

• The selected part will blink, indicating that it is the data to be changed.

3. Press the ADJUST button to change the data to the correct value.

• Data continues changing as long as the button is held down.

• In time mode, pressing the ADJUST button while

:is blinking resets the seconds counter to zero (not shown).

4. When all data is correct, press the SELECT button until the data stops blinking.

FOR OWNERS OF THE QUARTZ DATE MODEL

Replacing the Battery

The quartz data back uses a CR2025 lithium battery, located on the inside of the back cover. Replace the battery if the display changes or becomes dim while the camera batteries are removed.

1. Open the back cover.

2. Using a coin or similar object, turn the battery cover counter-clockwise, then remove it.

3. Remove the old battery and replace it with a new one.

• The + side should face up.

4.Replace the battery cover, then reset the date and time.

68

69

Image 36

Contents Page For Proper and Safe USE Table of Contents V E L I INames of Parts BodyData Panel ViewfinderQuick Operation Level Attaching the StrapInstalling the Batteries Checking Battery PowerBatteries Lens Attaching the LensRemoving the Lens Loading Film Extend the leader between the guide rails to the index markClose the back cover Handling the Camera Holding the CameraPressing the Shutter-Release Button Focus Signals Taking Pictures in FULL-AUTOFocus is confirmed Special Focus Situations Focus HoldUsing the BUILT-IN Flash Flash SignalsLens Shadowing Flash RangeFlash Cancel Cancelling Red-eye ReductionFill Flash Red-Eye ReductionRewinding the Film Automatic RewindManual Rewind Wait until the film is completely rewoundPortrait Mode Landscape ModeSubject Program Selection TipsClose-Up Mode Sports ModeNight Portrait Mode Photographing Night ScenesTurn the control dial until Appears in the data panelSELF-TIMER Continuous Advance ModeMode Aperture Priority Mode Flash Cancelling the FlashAperture Control Press the flash-mode button to pop-up the built-in flashMode Shutter Priority Push the built-in flash down or turn the accessory flash offMode Manual Shutter ControlFast Shutter Speed Slow Shutter Speed Metering in Manual Mode Taking Time Exposures buLb Firmly press the eyepiece cap into the eyepiecePress and hold the shutter- release button to take Picture D I T I O N a L A T U R E S Focus Wide Focus AreaAF Power Zoom and xi-Series Lenses Focus Spot AFFocus Manual Focus Focus AF Illuminator Exposure 14 Segment MeteringExposure Spot Metering Exposure Exposure CompensationExposure Setting the ISO Manually Exposure BracketingCancelling Bracketing Select the desired drive modeFlash Notes Bracketing with Exposure Compensation Button Cancelling Multiple Exposure Exposure Multiple ExposureAttach the 5400HS flash and set it to standard mode Flash High-Speed SyncMetering Multiple Exposures Compensate the exposures as followsPress the Mode button to choose the data imprinting format Flash Slow SyncExposing the Date/Time Slow-shutter SyncSetting the Date/Time Replacing the BatteryReplace the battery cover, then reset the date and time For Owners of the Quartz Date ModelSetting the Custom Functions Custom FunctionsCust 1 AF Release Priority Cust 2 Film Rewind StartCust 5 Flash Control in P Mode Cust 4 DX MemoryCust 6 Focus-hold button Lens Cust 7 Spot AF button Cust 8 Spot/AE Lock buttonCust 9 AF Illuminator built-in flash Program Reset Button P E N D IAccessory Information Compatibility of AccessoriesAccessory Flash Control Lens Specifications Exposure WarningsFor owners of the optional lens kits Lens HoodTrouble Shooting ProblemCare and Storage Operating Temp and ConditionsSpecifications Page 13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan