Polaroid MAXXUM HTsi instruction manual Cust 4 DX Memory, Cust 5 Flash Control in P Mode

CUSTOM FUNCTIONS

Cust 4 – DX Memory

1 – DX Memory Off

Film speed is always set to the DX-coded ISO. Non-DX-coded film is set to the ISO of the previous roll.

2 – DX Memory On

Changes to the film speed for a DX coded roll are saved and applied to future rolls with the same DX coded ISO. Use to consistently over/under-expose a specific film type.

• Film must be loaded before the ISO can be changed.

Cust 5 – Flash Control in P Mode

1 – Autoswitchover

Built-in flash pops-up when shutter-release button is pressed partway down. Flash will fire when necessary.

2 – Fill Flash (Manual Switchover) Flash-mode button must be pressed to raise the built-in flash (p26). Flash will fire every time the shutter is released.

• The TTL exposure system will ensure correct exposure.

• Push the built-in flash down to select flash cancel ().

CUSTOM FUNCTIONS

Cust 6 – Focus-hold button (LENS)

The mounted lens must have a focus hold button.

1 – Focus Hold

Pressing the focus-hold button on the lens locks the focus.

2 – Spot Focus

Pressing the focus-hold button on the lens selects the center focus sensor (p51).

3 – Continuous Focus

Select this setting when focusing on moving subjects.

Pressing the focus-hold button on the lens selects continuous focus.

72 73