Polaroid MAXXUM HTsi instruction manual Quick Operation

Page 6

QUICK OPERATION

1. Insert batteries.

• This camera uses two CR2 lithium batteries.

2. Attach lens.

• Align the red mounting dot on the lens with the one on the camera. Gently insert the lens into the mount and turn it clockwise until it clicks into the locked position.

3. Turn on power.

• Slide the main switch to ON.

4. Load film.

• Align the film tip with the red mark, then close the back cover.

QUICK OPERATION

5. Set Full-Auto operation.

• Press the program-reset button to set the camera to fully-automatic operation.

6. If using a zoom lens, rotate the zooming ring to frame your subject as desired.

7.Center your subject in the focus frame, then press the

shutter release button partway down.

•The camera will focus and set exposure automatically.

8. Take the picture.

• Gently press the shutter-release button all the way down to take the picture.

Image 6

Contents Page For Proper and Safe USE Table of Contents V E L I INames of Parts BodyData Panel ViewfinderQuick Operation Level Attaching the StrapInstalling the Batteries Checking Battery PowerBatteries Lens Attaching the LensRemoving the Lens Loading Film Extend the leader between the guide rails to the index markClose the back cover Handling the Camera Holding the CameraPressing the Shutter-Release Button Focus Signals Taking Pictures in FULL-AUTOFocus is confirmed Special Focus Situations Focus HoldLens Shadowing Using the BUILT-IN FlashFlash Signals Flash RangeFill Flash Flash CancelCancelling Red-eye Reduction Red-Eye ReductionManual Rewind Rewinding the FilmAutomatic Rewind Wait until the film is completely rewoundSubject Program Selection Portrait ModeLandscape Mode TipsClose-Up Mode Sports ModeTurn the control dial until Night Portrait ModePhotographing Night Scenes Appears in the data panelSELF-TIMER Continuous Advance ModeMode Aperture Priority Aperture Control Mode FlashCancelling the Flash Press the flash-mode button to pop-up the built-in flashMode Shutter Priority Push the built-in flash down or turn the accessory flash offMode Manual Shutter ControlFast Shutter Speed Slow Shutter Speed Metering in Manual Mode Taking Time Exposures buLb Firmly press the eyepiece cap into the eyepiecePress and hold the shutter- release button to take Picture D I T I O N a L A T U R E S Focus Wide Focus AreaAF Power Zoom and xi-Series Lenses Focus Spot AFFocus Manual Focus Focus AF Illuminator Exposure 14 Segment MeteringExposure Spot Metering Exposure Exposure CompensationExposure Setting the ISO Manually Exposure BracketingFlash Notes Cancelling BracketingSelect the desired drive mode Bracketing with Exposure Compensation ButtonCancelling Multiple Exposure Exposure Multiple ExposureMetering Multiple Exposures Attach the 5400HS flash and set it to standard modeFlash High-Speed Sync Compensate the exposures as followsExposing the Date/Time Press the Mode button to choose the data imprinting formatFlash Slow Sync Slow-shutter SyncReplace the battery cover, then reset the date and time Setting the Date/TimeReplacing the Battery For Owners of the Quartz Date ModelCust 1 AF Release Priority Setting the Custom FunctionsCustom Functions Cust 2 Film Rewind StartCust 5 Flash Control in P Mode Cust 4 DX MemoryCust 6 Focus-hold button Lens Cust 7 Spot AF button Cust 8 Spot/AE Lock buttonCust 9 AF Illuminator built-in flash Program Reset Button P E N D IAccessory Information Compatibility of AccessoriesAccessory Flash Control For owners of the optional lens kits Lens SpecificationsExposure Warnings Lens HoodTrouble Shooting ProblemCare and Storage Operating Temp and ConditionsSpecifications Page 13, 2-Chome, Azuchi-Machi, Chuo-Ku, Osaka 541-8556, Japan